Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
|
SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
|
|
#1
05-25-2005, 09:29 PM
|
||||
|
||||
|
Intake sub gear
Has anyone had to reset the load on the intake sub gear to correct a tapping sound?
 Help Steve
__________________
92 SVX AWD 130,000 w/ rebuilt SVX 4.11  97 Audi A4 1.8T (Daily Driver) 03 Ford Expedition(hers) SVXepidia SVX information warehouse Are you in? My Old Locker A 4.11 Founding Father "Tranny #6" I really need a manual  Reading IX [SIGPIC][/SIGPIC] Ya I was there
|
|
#2
05-26-2005, 10:17 AM
|
||||
|
||||
|
More detail?
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available!
|
|
#3
05-26-2005, 03:07 PM
|
||||
|
||||
|
Ok I will try.
I replaced mt exhaust cam about two months ago. when I removed the intake cam I did not install the service bolt per directions, I read the direction after the fact  The car runs fine and the subie dealer said that the intake cam sub gear need to have the backlash set to get rid of the tapping sound. The sub gear sit in front of the main gear on the intake shaft. I will find pictures when I get home tonight.Steve
__________________
92 SVX AWD 130,000 w/ rebuilt SVX 4.11 97 Audi A4 1.8T (Daily Driver) 03 Ford Expedition(hers) SVXepidia SVX information warehouse Are you in? My Old Locker A 4.11 Founding Father "Tranny #6" I really need a manual Reading IX [SIGPIC][/SIGPIC] Ya I was there
|
|
#4
05-26-2005, 03:09 PM
|
||||
|
||||
|
Ah, I didn't realise you were talking about the cams.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available!
|
|
#5
05-28-2005, 08:06 PM
|
||||
|
||||
|
I have attached a pic of the cams so you all can see where and what the sub gear is.
Steve
__________________
92 SVX AWD 130,000 w/ rebuilt SVX 4.11 97 Audi A4 1.8T (Daily Driver) 03 Ford Expedition(hers) SVXepidia SVX information warehouse Are you in? My Old Locker A 4.11 Founding Father "Tranny #6" I really need a manual Reading IX [SIGPIC][/SIGPIC] Ya I was there
|
|
#6
09-05-2014, 02:15 PM
|
|||
|
|||
|
Re: Intake sub gear
Ok realize this is a 9+ year old thread but no answer seems to have been provided and all the searching I have done I have not come across anything else.
Icingdeath88 has tried to give me an explaination, Thanks svxfiles I hope that is good I will be linking the mechanic to your post. Last edited by 92 SVX; 09-05-2014 at 04:02 PM.
|
 |
|
|
Hybrid Mode
