SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Going to pull-a-part, please guide me!
I am going to pull a part this weekend and wanted to get some input on removal procedures and the necessary tools. I need to be prepared ahead of time because I'll be 5 hours away from home (FYI, I'm not going that far just for the SVX, I'm going to be close to a PaP that has one already for other reasons).
I am looking for information on how to remove the following and what tools will be required. Please go easy on me, I've only had my SVX for less than a month so far. * Driver's door sill (pretty sure it's no tools and just pulls up to release the tabs) * Dash switch for cruise/fogs/security * Button for openign center console * Trunk lid spoiler I appreciate any info you may have! |
#2
|
||||
|
||||
Re: Going to pull-a-part, please guide me!
Quote:
__________________
-Dustin 1992 Ebony LS-L w/191k miles Mods: a few and acouple more 1995 Brilliant Red L/AWD w/154k miles Mods: Stebro catback exhaust, K&N drop in filter, ECUtune ST1v5, 4.44, lots of JDM goodies 1992 Pearly LS-L w/154k miles Sold Mods: 4.11, rust 2008 DGM Legacy spec.B w/245k miles Mods: Cryotune Stage3, VF52, bushings galore, STi pink springs, Bilstein HDs My Locker The only man alive who drives three "Subu SVS's".......according to my insurance company Last edited by odepaj; 04-13-2012 at 11:19 AM. |
#3
|
||||
|
||||
Re: Going to pull-a-part, please guide me!
Thanks! Regarding the door sill, are you saying it's not a removable piece? Or just that they are fragile and not likely to come out like they are supposed to?
Are you saying the switches literally just pull straight out? How do you get a hold of them to do so? |
#4
|
||||
|
||||
Re: Going to pull-a-part, please guide me!
All easy stuff.
- Door Sill will just lift out but it is held in place by 4 plastic fins with metal tabs on them, and they have a tendency to snap off so go slow and be careful. Maybe bring a thin flat small pry bar, that can be slipped under to pry up at the fastner connection point. - Dash buttons have a cover that slides off then they just pry off. There is a PDF in the How to for Instrument cluster removal. Part of that process is shows the removal. Here is a Link, page 2 shows the switch removal. http://www.subaru-svx.net/forum/showthread.php?t=54152 A flat head screw driver to help pry them out should make it easier. - Center console will just need a Philips screwdriver, 2 screws and yeah take the whole top. - The spoiler is just 4 bolts, very easy access, but a set of metric socket would be best.
__________________
1992 LSL ebony pearl 170k - Thank you Ron Mummert Reading Box of Wine Car ----------------------------------- 1992 SVX LSL 5-Speed Sold at 180K 2019 1995 SVX Lsi Polo Sold at 118K 2007 Last edited by Sean486; 04-11-2012 at 08:16 PM. |
#5
|
||||
|
||||
Re: Going to pull-a-part, please guide me!
Thanks! Now I just have to hope the car has these parts remaining when I get there! lol
|
#6
|
||||
|
||||
Re: Going to pull-a-part, please guide me!
Which PaP?
__________________
http://i840.photobucket.com/albums/z...93705d9zzz.png |
#7
|
||||
|
||||
Re: Going to pull-a-part, please guide me!
Knoxville, TN. Someone made a thread about it in the FS section and luckily my fiancee has to be in Knoxville Sunday so I'm tagging along. As you know, my other plans for parts fell through completely :-(
|
#8
|
||||
|
||||
Re: Going to pull-a-part, please guide me!
Ah...Do you take 64 over to 65? Are you gonna be gone all day?
__________________
http://i840.photobucket.com/albums/z...93705d9zzz.png |
#9
|
||||
|
||||
Re: Going to pull-a-part, please guide me!
Not sure what route, and yes all day. It's 5 hours one way, lol.
I looked today and I did not see the screws to remove the center console. Is there a how to or does someone have a pic? I think I'm good on the rest. Thanks for helping an SVX newb! |
#10
|
||||
|
||||
Re: Going to pull-a-part, please guide me!
The console lid has the screws at the rear. Look for the hinge
__________________
http://i840.photobucket.com/albums/z...93705d9zzz.png |
#11
|
||||
|
||||
Re: Going to pull-a-part, please guide me!
To remove the center console, there are 5 screws. 3 underneath the false bottom of the pocket, and 2 at the very front of it, on either side of the shifter, on the sides, under removable trim panels. You will also have to remove the shifter surround.
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project '97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod Now a mod "over there" ............Photo album |
#12
|
||||
|
||||
Re: Going to pull-a-part, please guide me!
Thank you!
|
|
|