SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Wanted: Crank/Cam Position Sensors
Looking for known working/good condition crank position sensor #1 (vertical plug).
Let me know if you have any. cheers Last edited by neverLift; 04-29-2016 at 11:05 AM. |
#2
|
||||
|
||||
Re: Wanted: Crank/Cam Position Sensors
You can use the Crank and cam sensors from a EJ motor, the mounting tab is different, but can be modded to work, the sensor is the same thing, I have done this, it will work
__________________
Huck Subaru Ambassador 92 SVX LS-Tour Magnaflow Exhaust, 5-Spd-AWD 88 XT6 AWD 5-Speed "Bride of FrankenWedge" 15 Impreza Premium Sedan 15 Crosstrek XV 5-Speed My 5-Speed "How-To" Write-up 1976 Pontiac Firebird Formula Current Count of Subaru's Owned.... "70" |
#3
|
|||
|
|||
Re: Wanted: Crank/Cam Position Sensors
Thanks, I may resort to a EJ22 sensor, but if I can I'd like to not have to modify anything.
cheers |
#4
|
||||
|
||||
Re: Wanted: Crank/Cam Position Sensors
New EJ22 ones are about $20 on Rockauto.com (for a 1998 Impreza 2.2).....a bit cheaper than the SVX one.....
__________________
Huck Subaru Ambassador 92 SVX LS-Tour Magnaflow Exhaust, 5-Spd-AWD 88 XT6 AWD 5-Speed "Bride of FrankenWedge" 15 Impreza Premium Sedan 15 Crosstrek XV 5-Speed My 5-Speed "How-To" Write-up 1976 Pontiac Firebird Formula Current Count of Subaru's Owned.... "70" |
#5
|
|||
|
|||
Re: Wanted: Crank/Cam Position Sensors
Yeah! Crazy the difference for a slightly different shape of plastic.
I take it I'd need a matching plug for the Legacy sensor, and then file/slot the bolt hole to line up with the SVX CPS bolt hole? cheers |
#6
|
||||
|
||||
Re: Wanted: Crank/Cam Position Sensors
Nope, the SVX wiring plugs right into it, then just turn the sensor until the SVX bolt will catch the side of the sensor (the hole is a slightly different distance out).
The sensor has no pressure on it, so the bolt is just to hold it in.
__________________
Huck Subaru Ambassador 92 SVX LS-Tour Magnaflow Exhaust, 5-Spd-AWD 88 XT6 AWD 5-Speed "Bride of FrankenWedge" 15 Impreza Premium Sedan 15 Crosstrek XV 5-Speed My 5-Speed "How-To" Write-up 1976 Pontiac Firebird Formula Current Count of Subaru's Owned.... "70" |
#7
|
|||
|
|||
Re: Wanted: Crank/Cam Position Sensors
Thanks for that! I picked up a CPS from a 2003 Impreza Outback (was the only Subaru at the junkyard) and it worked. Had the correct plug and oriented it as you described. I appreciate the help. Here are some photos for anyone searching this in the future.
If anyone has a working #1 crank sensor (vertical plug), I'm still interested. cheers |
#8
|
||||
|
||||
Re: Wanted: Crank/Cam Position Sensors
Glad I could be of assistance! And glad you're SVX is back on the road!
__________________
Huck Subaru Ambassador 92 SVX LS-Tour Magnaflow Exhaust, 5-Spd-AWD 88 XT6 AWD 5-Speed "Bride of FrankenWedge" 15 Impreza Premium Sedan 15 Crosstrek XV 5-Speed My 5-Speed "How-To" Write-up 1976 Pontiac Firebird Formula Current Count of Subaru's Owned.... "70" |
#9
|
|||
|
|||
Re: Wanted: Crank/Cam Position Sensors
I've got a #1 sensor on my parts car. I'll remove it this morning and send you a PM when I'm sure I didn't damage it.
It's 0.2 degrees C out there. |
#10
|
|||
|
|||
Re: Wanted: Crank/Cam Position Sensors
Awesome! I appreciate it, working in the cold is no fun.
Cheers Last edited by neverLift; 10-01-2015 at 09:56 AM. |
#11
|
|||
|
|||
Re: Wanted: Crank/Cam Position Sensors
On mine there's a vertical plug Jecs A29-000R1? and Jecs A29-000R00 with an angled plug. Which is it?
Last edited by Blacky; 10-01-2015 at 11:46 AM. |
#12
|
|||
|
|||
Re: Wanted: Crank/Cam Position Sensors
The vertical plug A29-000R1, should be the one slightly closer to the PS pump.
Cheers |
#13
|
|||
|
|||
Re: Wanted: Crank/Cam Position Sensors
I sent you a PM.
|
#14
|
|||
|
|||
Re: Wanted: Crank/Cam Position Sensors
Still looking.
cheers |
#15
|
|||
|
|||
Re: Wanted: Crank/Cam Position Sensors
bump!
_____ |
|
|