SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
new "bombproof" drive shaft muahahaha
http://i566.photobucket.com/albums/s...2/IMG_2094.jpg
http://i566.photobucket.com/albums/s...2/IMG_2093.jpg http://i566.photobucket.com/albums/s...2/IMG_2076.jpg http://i566.photobucket.com/albums/s...2/IMG_2075.jpg bigger beefier and the ujoints are only a $15 replacement lol
__________________
Tranny goes in, tranny comes out, tranny goes in.....AW ****, tranny comes out.... |
#2
|
||||
|
||||
Re: new "bombproof" drive shaft muahahaha
Quote:
__________________
The Worm _______________ June '91 Claret LSL #1733, Enkei RS-5's x 16", Original Paint, accompanied by Beautifully speckeled Front Bumper, Sony Audio Components, Small Car Shift Kit, "How to" Hood Lifts {Perfect}, "15 Minute Suspension Mod" Motorsport Floor Mats. Perma-Cool External T. Filter, New Front Axels {1/2008}. "Classic Radiators" unit "$36 coil alternative" and Tranny rebuild at 287k 8/2012 '05 Infinity G35 Coupe. No Mods, 33K Miles |
#3
|
||||
|
||||
Re: new "bombproof" drive shaft muahahaha
its custom made, its essentially a GM style driveshaft the U-joints are serviceable and if need to be replaced its only gonna be 15 for a new one.
__________________
Tranny goes in, tranny comes out, tranny goes in.....AW ****, tranny comes out.... |
#4
|
||||
|
||||
Re: new "bombproof" drive shaft muahahaha
Is that for your SVX?
Are the U-Joints going to be able to handle the angle without the center carrier? Is it radioactive?
__________________
Dave - 03 Baja - 92 SVX - 86 Brat - 08 OB 3.0 |
#5
|
|||
|
|||
Re: new "bombproof" drive shaft muahahaha
<<Are the U-Joints going to be able to handle the angle without the center carrier?>>
doubt it. but before worrying about that, its gonna rub like crazy.
__________________
Liberalism is a disease. When you can stare at facts and ignore them anyway, you have it. |
#6
|
||||
|
||||
Re: new "bombproof" drive shaft muahahaha
This is to go with the 5-speed right?
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project '97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod Now a mod "over there" ............Photo album |
#7
|
||||
|
||||
Re: new "bombproof" drive shaft muahahaha
no rub issue and no angle issue i have a nice straight line drive
as for radioactive...yes
__________________
Tranny goes in, tranny comes out, tranny goes in.....AW ****, tranny comes out.... |
#8
|
||||
|
||||
Re: new "bombproof" drive shaft muahahaha
Why would the U joints have any problem? While he added angle up front, he reduced angle in the rear. If they could handle the center carrier to rear section's stock angle, they should have no problem handling the 2 lesser angles.
__________________
Matt Locker Link 2015 BRZ Limited 6MT 92 Ebony LS-L ECUtune Stage2av1, Z32 MAF, 370cc injectors, TomsSVX intake, BontragerWorks 22mm RSB #003, HID Hi and Lo beams, OT endlink and bushing mods, PWR Aluminum radiator, Harvey's QC shift kit, 2.5" flowmaster 80 exhaust, 17" Michelin Pilot Sport A/S, Poly sway bar bushings, Slotted Bradi rotors, AFBeefcake powdercoated calipers, 97 grill, and a huge set of air horns. 300,000 miles and counting 92 Ebony LS-L. ecutune stage1v4, motorsport 1pc pulley. Garage Queen - sold to Dad in upstate NY 155,000 miles 19 Subaru Ascent Premium - -Hers !. 89 DL 4x4 little red wagon - a.k.a. The immortal suby. 275k R.I.P. |
#9
|
||||
|
||||
Re: new "bombproof" drive shaft muahahaha
yepp, also the ujoints are about twice as big as stock and were meant for trucks, i should be fine
__________________
Tranny goes in, tranny comes out, tranny goes in.....AW ****, tranny comes out.... |
#10
|
||||
|
||||
Re: new "bombproof" drive shaft muahahaha
Sweet.
What was the reasoning behind this?
__________________
Jesus is the remedy 2015 Expedition EL Ecoboost Ebony Pearl '95 Subaru SVX LSi Home of the Bontrager Works 22mm rear sway bar!! |
#11
|
||||
|
||||
I'm very interested in your long-term results. This is exactly what I was dissuaded from doing.
__________________
"That which can be asserted without evidence can be dismissed without evidence." '92 Dark Teal SVX LS-L, >146,000m 3 pedals, 5 speeds., restoration underway. 2012 Honda Insight, slow but cute. |
#12
|
||||
|
||||
So how's this working out?
My junkyard Outback shaft is developing a nasty whine at highway speeds and I need to replace it soon. Can you give us a few dimensions like diameter?
__________________
"That which can be asserted without evidence can be dismissed without evidence." '92 Dark Teal SVX LS-L, >146,000m 3 pedals, 5 speeds., restoration underway. 2012 Honda Insight, slow but cute. |
#13
|
||||
|
||||
Re: new "bombproof" drive shaft muahahaha
i'm having no issues with it, mine's a 3" diameter piping, i had a choice to either go 3" or 2-3/4" but when i installed it i noticed that 3" might've been too much it was slightly rubbing one of the fuel lines so i just adjusted the angle of the transmission to compensate,
the reason why the shaft is bigger is cause if you use a smally pipe you get a "skip rope" effect, longer the pipe the thicker it needs to be. the stock DS is 2"-2-1/4" but thats because there's the carrier bearing in the middle. as for length i dont exactly remember i measured it from the flange to the rubber seal on the transmission, when you get a DS made make sure theirs some play in the driveshaft cause if its on tight and not moving, the transmission with break on bumpers cause it will push on the spline rod at the back. I was tempted to paint the driveshaft green and black with the barberpole spiral but i got lazy :P
__________________
Tranny goes in, tranny comes out, tranny goes in.....AW ****, tranny comes out.... Last edited by Gamesy; 09-04-2010 at 11:54 AM. |
#14
|
||||
|
||||
Yeah the shop I went to was telling me due to the length they would not make me a pipe smaller than 3 inches in diameter.
I didn't have them make it because I was worried about fitment and things, but I guess if you're having no problems there's no reason not to do it. Were you able to compare the weight to the stock shaft? How did you adjust the angle of the transmission?
__________________
"That which can be asserted without evidence can be dismissed without evidence." '92 Dark Teal SVX LS-L, >146,000m 3 pedals, 5 speeds., restoration underway. 2012 Honda Insight, slow but cute. |
#15
|
||||
|
||||
Re: new "bombproof" drive shaft muahahaha
the weights were about the same i never did end up weighing them. but picking them up was about the same, the new one might be a bit heaviers, it has bigger beefier ujoints compared to the stock, its essentially an SUV driveshaft.
the way i made my xmember allows me to adjust the angle with spacers.
__________________
Tranny goes in, tranny comes out, tranny goes in.....AW ****, tranny comes out.... |
|
|