SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#16
|
||||
|
||||
I have never had them tell me they are out of stock... I ordered a set for Sicksubie a month ago and got them the next day... They must like me more
Tom |
#17
|
||||
|
||||
Quote:
I guess they just hate me then, called them at the begining of last month. It always sounds like the same girl, maybe it is just the way she handles sales?
__________________
-Mike ECUTune2v7 - 4.11 5 Speed - Sprung 6 Puck Clutch - D&S Rotors - SS Brake & Clutch Lines - HKS Panel Filter - HeaderBack Exhaust -80GB Hard Drive - GroupN Engine Mounts - - some other "tricks"
[SIGPIC][/SIGPIC] In progess: track down mystery noise <-identified, paint the new dash, get better pic Spring plans: Replace Trans - Integrate ECU with the carputer - Suspension - Go back to STI Filter - Paint? Maybe not - Next Oil change: Purolator L30165 Member #995 | My Locker | My New Locker Catch you next at: ? Auto-X ? |
#18
|
||||
|
||||
If the WRX/STI mounts work with our cars, then couldn't we use aftermarket WRX/STI mounts too?
__________________
bLAh
|
#19
|
||||
|
||||
Quote:
Tom |
#20
|
||||
|
||||
ooo...I should've known.
__________________
bLAh
|
#21
|
|||
|
|||
can anyone tell if the Group N mounts are shorter than the stock SVX motor mounts? i'm looking for a set of motor mounts that are shorter than the stock ones as the project motor is slightly hitting the hood. maybe a 1/2 inch shorter would be great. thanks
|
#22
|
||||
|
||||
groupN mounts on the stock brackets are 1/4" lower but the mount and the bracket need to be cut and ground
Tom |
#23
|
|||
|
|||
ok, thats a start. thanks
|
#24
|
|||
|
|||
I cant find the site right now, I will post it later but i got my GroupN engine mounts and tranny mounts and the STI pitch from then. all if it just bolted in. I did not measure the engine clearance but did not notice any change.
|
#25
|
||||
|
||||
I used oem sti mounts and it raised the engine 1/4 to 1/2 inch. I used them with the sti brackets. Are the svx brackets shorter?
__________________
`92 pearlie 220k Tranny Cooler, shift kit, stage 1v4, d/s rotors, axxis pads, Perrin Pulley '00 GMC Sonoma ZR2. |
#26
|
||||
|
||||
The SVX brackets are made to work with the SVX mounts. The mounts are 1/4" taller in body. So using the sti mounts in the stock brackets with a 1/4" spacer, it will sit in the stock location. Without the spacer, it will drop the 1/4" or maybe more depending on the geometry, which is useful for guys who need hood clearance like the stage 3 guys and svxpert
Tom |
|
|