SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Side garnish door removal
Anyone know how to remove the side garnishes on the doors? I tried pulling on one and it broke (one) clip and so i stoped my self.
By side garnish i mean the plastic body part attached to the lower half of the doors... Also is removing a fender easy? Im doning some touch up body work.
__________________
-Khalil *1992 SVX Red. Now 100k and climbing Tranny rebuilt @ 84k. Repaint @ 87k. Mods (in order of install)- K&N air filter, ECUtune stage 1v.4, Alternator mod, removed intake resonator, B&M Supercooler, Window Tint, JDM Emblem, Hid Kit 5000K. |
#2
|
||||
|
||||
You need to remove the inner door panel first, there are then three 10mm nuts that are on studs that come through the door holding the cladding in place.
There are also a series of plastic clips, IIRC I priced them from Subaru at ~$7.00 each If you give them a quarter turn from inside the door, you may be able to save them.
__________________
Dave - 03 Baja - 92 SVX - 86 Brat - 08 OB 3.0 |
|
|