SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Rear Diff. plug size???
Thought the rear diff. fill/drain plugs took a 1/2" drive to remove but this appears too small...what exactly is the size needed to remove this guys?...seems like a 5/8" or metric equivalent square bit.
Thanks, Craig |
#2
|
||||
|
||||
I've always used a 1/2 inch drive - in fact I did it with one yesterday. It doesnt fit perfectly, but I havent ever stripped one out using it.
__________________
Matt Locker Link 2015 BRZ Limited 6MT 92 Ebony LS-L ECUtune Stage2av1, Z32 MAF, 370cc injectors, TomsSVX intake, BontragerWorks 22mm RSB #003, HID Hi and Lo beams, OT endlink and bushing mods, PWR Aluminum radiator, Harvey's QC shift kit, 2.5" flowmaster 80 exhaust, 17" Michelin Pilot Sport A/S, Poly sway bar bushings, Slotted Bradi rotors, AFBeefcake powdercoated calipers, 97 grill, and a huge set of air horns. 300,000 miles and counting 92 Ebony LS-L. ecutune stage1v4, motorsport 1pc pulley. Garage Queen - sold to Dad in upstate NY 155,000 miles 19 Subaru Ascent Premium - -Hers !. 89 DL 4x4 little red wagon - a.k.a. The immortal suby. 275k R.I.P. |
#3
|
|||
|
|||
me too, 1/2" that is. remember to take the fill plug out before removing the drain plug.
|
#4
|
|||
|
|||
Gave both the plugs a good PB Blaster soaking and will use the 1/2" drive with a little shim stock to take up the slack since the fill plug is a bit buggered by my prior attempt to loosen. I guess I can always spring for a new plug if I end up using a bolt extractor ! Anyone know the size/thread size of these plugs ?
Thanks for the feedback... |
|
|