SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Lowering Springs from Japan
They arrived today - and yellow to match the complete bushing set from Poland that I have been running for a couple of years.
Now all I got to do is also fit the Koni inserts that have been sitting upright in the OEM boxes. This is guaranteed to lower the car from 1.5" - 2" all around.
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted. |
#2
|
||||
|
||||
Re: Lowering Springs from Japan
Where did you buy them?
__________________
1994 SVX LSi JDM Tailbar and Grill, Clear Corners, 15min-mod, Nevin Blue RSB, G-FORCE SPORT COMP-2 Tires, Phenolic Spacers (Manifold & Throttle Body), SS Brake Lines, Maniac Electric Motors 160A Alternator 2008 Legacy 3.0R |
#3
|
||||
|
||||
Re: Lowering Springs from Japan
http://www.jauce.com/search/subaru+s...2&n=100&link=&
the same link - search SUBARU SVX they go between 18000 to 21000 Yen http://www.jauce.com/auction/e200355677 This is also where I recently found the rear deck deioniser/blower (see link below). http://www.subaru-svx.net/forum/showthread.php?t=64066
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted. Last edited by SURTEESS; 10-28-2016 at 05:10 PM. |
#4
|
||||
|
||||
Re: Lowering Springs from Japan
Is there anyway to ask Seller questions about items...I don't see a Contact link on auction sites.
THX |
#5
|
||||
|
||||
Re: Lowering Springs from Japan
That and I didn't see any of the sellers that would ship to the US
__________________
1994 SVX LSi JDM Tailbar and Grill, Clear Corners, 15min-mod, Nevin Blue RSB, G-FORCE SPORT COMP-2 Tires, Phenolic Spacers (Manifold & Throttle Body), SS Brake Lines, Maniac Electric Motors 160A Alternator 2008 Legacy 3.0R |
#6
|
||||
|
||||
Re: Lowering Springs from Japan
At the bottom of the auctions that don't say right up top that they don't ship inernationally, there is section that says Seller will ship to Jauce site that ships overseas with post $$ estimate as long as you know item's weight in grams !!
|
#7
|
||||
|
||||
Re: Lowering Springs from Japan
INTERNATIONAL DELIVERY
Seller will ship the item to JAUCE warehouses and JAUCE will ship to the buyer internationally. See more details INTERNATIONAL DELIVERY FEE ESTIMATION Destination: Estimated weight: gram Get "Estimated" Rates |
#8
|
||||
|
||||
Re: Lowering Springs from Japan
I completely missed that!
For those interested, here is a detailed explanation of someones experience using Jauce to ship to North America.
__________________
1994 SVX LSi JDM Tailbar and Grill, Clear Corners, 15min-mod, Nevin Blue RSB, G-FORCE SPORT COMP-2 Tires, Phenolic Spacers (Manifold & Throttle Body), SS Brake Lines, Maniac Electric Motors 160A Alternator 2008 Legacy 3.0R |
#9
|
||||
|
||||
Re: Lowering Springs from Japan
Link missing??
|
#10
|
||||
|
||||
Re: Lowering Springs from Japan
Sorry been away from PC for a couple of days - the spings from Japan weigh approx 12kg and the actual box size is 390mm X 235mm X 440mm.
The springs are approx only 300mm in length. Hope this helps you with calculating shipping costs.
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted. |
#11
|
||||
|
||||
Re: Lowering Springs from Japan
Thanks...much appreciated.
|
#12
|
||||
|
||||
Re: Lowering Springs from Japan
Quote:
Sorry Here is the link - http://www.norotors.com/index.php?topic=18729.0
__________________
1994 SVX LSi JDM Tailbar and Grill, Clear Corners, 15min-mod, Nevin Blue RSB, G-FORCE SPORT COMP-2 Tires, Phenolic Spacers (Manifold & Throttle Body), SS Brake Lines, Maniac Electric Motors 160A Alternator 2008 Legacy 3.0R |
Thread Tools | |
Display Modes | |
|
|