Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
|
SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
05-04-2007, 10:43 PM
|
||||
|
||||
|
messed up lug nut and stud on rear wheel
Does anyone know if the lugs can be knocked out and new ones put in the rear wheel on my svx without pressing out the wheel bearing please?
Thanks, Keith 
|
|
#2
05-05-2007, 12:18 AM
|
||||
|
||||
|
One of the members I know had one break. They just pulled the wheel and then put the stud in it. They did not have to pull the bearings.
__________________
. Earl .... ... .... ><SVX(*> Subaru Ambassador [COLOR=”silver”]1992 Tri Color L[/COLOR] ~45K (06/91) #2430 1992 Dark Teal LS-L ~184K (05/91) #0739 1992 Claret LS-L ~196K (05/91) #0831 1992 Pearl LS-L ~103K (06/91) #1680 1992 Pearl LS-L ~151K (06/91) #2229 1992 Dark Teal LS ~150K (07/91) #3098 (parts car) 1992 White LS-L ~139K (08/92) #6913 1993 25th AE ~98K (02/93) #164 1993 25th AE ~58K (02/93) #176 1993 25th AE ~107K (02/93) #215 1993 25th AE ~162K (02/93) #223 1994 Laguna Blue Pearl LSi ~124K (1/94) #2408 1994 Laguna Blue Pearl LSi ~144K (10/93) #1484 1994 Laguna Blue Pearl LSi ~68K (10/93) #1525 1994 Barcelona Red LSi ~46K (02/94) #2624 1994 Pearl LSi ~41K (12/93) #1961 1995 Bordeaux Pearl LSi ~70K (02/95) #855 1996 Polo Green LSi ~95K (03/96) #872 1997 Bordeaux Pearl LSi ~55K (08/96) #097 2003 Brilliant Red LS1 Convertible ~29K (04/03) #8951 1999 Magnetic Red LS1 Coupe ~33K (04/99) #6420 My Email | Old Locker | New Locker | Picture of 15 of the 19
|
|
#3
05-05-2007, 05:23 AM
|
|||
|
|||
|
I just replaced 2 on a rear wheel on Thursday. It can be done w/o removing the hub from the axle, but it might not really be easier. I removed the caliper and disc then the parking brake shoes to create enough clearance to move the ABS tone ring back away from the stud. I understand the tone rings are fragile, but I haven't broken one, yet. The studs can then be pounded out. I found the greatest clearance was with the stud about 2 o'clock. Pull the new stud through using a spacer about 3/8" between the hub and lug nut.
Good luck.
|
|
#5
05-05-2007, 12:53 PM
|
||||
|
||||
|
Studs are one of the SVX parts you can find at any dealer. Inexpensive too. The tire store over tightened mine and two broke getting the wheel off. Replaced them the without removing the hub.Gene
__________________
Gene and Ben 1992 SVX LS AWD 110K - Liquid Silver 1994 SVX LSi AWD 128K - White Pearl (daily driver) 1994 SVX LSi AWD 95K - Emerald Pearl (sold) 1992 SVX LS-L AWD 115K - Dark Teal 4.44 swap (sold)
|
|
#6
05-05-2007, 01:14 PM
|
||||
|
||||
|
Quote:
 TY Keith
|
 |
|
|
Linear Mode
