SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
SOLD New STD size Aluminum Rod bearings
I have a complete set of 6 made in Japan Clevite Aluminum rod bearings for an EG33 sitting around not being used I'd like to clear off my shelf.
Standard size These are the made in Japan Aluminum bearings that cost about twice what tri-metal bearings do. These are the bearings all the auto manufacturers have switched to in recent years because they essentially last forever. They are also a much safer bet than tri-metal bearings because they have a much thicker friction/wear surface so they are much less prone to catastrophic failure. $70 (Revised: sold)
__________________
Michael Emery, MBA, MS 94 SVX LSI, Ebony Pearl profile 94 SVX LSI, Ebony Pearl from back Performance and Multi-Fuel Tuning Last edited by longassname; 12-21-2015 at 09:25 PM. |
#2
|
||||
|
||||
Re: New STD size Aluminum Rod bearings
Michael, is there a less labor intensive method I could swap these bearings in...like dropping the oil pan only giving me access to the rod bolts?
THX |
#3
|
||||
|
||||
Re: New STD size Aluminum Rod bearings
unfortunately no
|
#4
|
||||
|
||||
Re: New STD size Aluminum Rod bearings
I've listed on them on ebay as well. Better if you buy here ...
http://www.ebay.com/itm/231779050252...witem=&vxp=mtr
__________________
Michael Emery, MBA, MS 94 SVX LSI, Ebony Pearl profile 94 SVX LSI, Ebony Pearl from back Performance and Multi-Fuel Tuning Last edited by longassname; 12-09-2015 at 02:45 PM. |
#5
|
||||
|
||||
Re: New STD size Aluminum Rod bearings
relisted: http://www.ebay.com/itm/231785554362
|
#6
|
||||
|
||||
Re: New STD size Aluminum Rod bearings
Whoever was asking me about these from here on ebay it would be better if you asked me about them here. My email is usfwalden@aol.com
|
#7
|
||||
|
||||
Re: New STD size Aluminum Rod bearings
I didn't hear from the person from here who messaged me on ebay so I relisted them. I'd rather not pay the ebay fees but oh well. I turned it into an auction starting at 99 cents with a buy it now for $70. I believe the way it works, the buy it now option disappears with the first bid.
http://www.ebay.com/itm/231789598768 |
#8
|
|||
|
|||
Re: New STD size Aluminum Rod bearings
I wish I knew whether I needed these or the oversize at this point, I wont be tearing down the engine till spring though.
__________________
1992 SVX Pearlie: AmsOil signature synthetic 10w40 and Ea15k20 filter, Cobb crank pulley, Outlaw Engineering spacers and tb bypass, LGT 5spd, Slotted Crossdrilled rotors and ceramic pads, 11:1 compression, EGR delete, Port & Polished heads, SaikoMichi catch can, A/c delete. |
#9
|
||||
|
||||
Re: New STD size Aluminum Rod bearings
if your engine doesn't have a rod knock you need standard size bearings.
if your engine has a rod knock you will need oversize bearings. |
#10
|
|||
|
|||
Re: New STD size Aluminum Rod bearings
Well then its a done deal! PM me your details and I'll get you payed.
__________________
1992 SVX Pearlie: AmsOil signature synthetic 10w40 and Ea15k20 filter, Cobb crank pulley, Outlaw Engineering spacers and tb bypass, LGT 5spd, Slotted Crossdrilled rotors and ceramic pads, 11:1 compression, EGR delete, Port & Polished heads, SaikoMichi catch can, A/c delete. |
#11
|
||||
|
||||
Re: New STD size Aluminum Rod bearings
Payment received. Bearings are sold.
|
|
|