Need part number EG33 cylinder head piece

[neverLift]

Hello all,

Currently rebuilding my EG33 and one of the hydraulic lifter LINERS was damaged so the machine shop removed it. They couldn't get it through their suppliers so I am going to attempt to order one from the dealership. Hopefully it is something sold separately and not just with a complete head. If anyone knows the part number that would be most helpful. Yes I have contacted the dealership, still waiting to hear back. Opposed Forces parts catalog didn't show it either.

Need this liner:

Missing here:

For reference:


cheers
-Evan

[michael]

for face:

[michael]

Any luck getting info on your part?

[Hocrest]

Contact Jackie at Annapolis Subaru. She knows the SVX and should be able to ship to Canada. (888) 851-5976

[neverLift]

Hahaha I didn't even see that face! Hilarious.

Thanks for the tip, I'll give that a shot.

cheers
-Evan

[Subachouli]

Evan, I'm looking at the parts diagrams now, and I can't seem to find this. I think it may be part of the head.

I'll take a closer look on my lunch break and hopefully have some more solid information for you.

-Jim (Subaru dealer Parts Guy)

[icingdeath88]

The engine parts catalog doesn't show any such part.

[neverLift]

Thanks for the help guys, as I expected it is a part of the head. I should be able to machine something up that will work.

cheers
-Evan

[michael]

Someone here has to have a bad head you can harvest from, try the parts wanted section.

[EdWindows]

Originally Posted by neverLift

Thanks for the help guys, as I expected it is a part of the head. I should be able to machine something up that will work.

cheers
-Evan

Or you could ditch the hydraulic valve lash adjusters and stock valves and get some aftermarket valves and springs like RallyBob did.

[icingdeath88]

Originally Posted by EdWindows

Or you could ditch the hydraulic valve lash adjusters and stock valves and get some aftermarket valves and springs like RallyBob did.

He'd still need the HVLA liner.

[neverLift]

Although that is the plan for a future set of heads I would like to build, just want to keep the engine stock for now. And as stated above its the liner not the HVLA itself.

Thanks guys for the input, I've got a WTB posted if anyone knows of some heads that could be sacrificed. Worst case I just take some measurements and make a CAD model to get one machined.

cheers
-Evan

[EdWindows]

Originally Posted by neverLift

Worst case I just take some measurements and make a CAD model to get one machined.

I'd say that's your best bet. It's not too hard to lathe something as simple as that. Just bust out some calipers and start lathing some steel.