intake question

[petesvx2]

the hose going from the end of my cone filter to the wheel well area has a hole in it, its a plastic hose and i was wondering if i really need this or if it is easy to take off and replace. i ask this for fear i might break something if i do it without a clear answer.

[Seraph]

Originally posted by petesvx2
the hose going from the end of my cone filter to the wheel well area has a hole in it, its a plastic hose and i was wondering if i really need this or if it is easy to take off and replace. i ask this for fear i might break something if i do it without a clear answer.

Sometimes, a little trial and error might be fun. You can take if off but why?

Lwin

[petesvx2]

well there's a huge hole in it
i did kinda patch it with electrical tape. is that a stock type of thing or was the hole by the wheel well under the car added on by the previous owner?

[Seraph]

The hole is stock. It for the original intake. If I were you, I'd keep the hole open but put a mash behind the hold to prevent rocks from entering the engine bay or into the cone filter. Apart from that, it's all fully stock. The car should not have a cone filter as a stock unit though.

Lwin

[petesvx2]

ok thanks, will do