The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 12-27-2008, 07:03 PM
redlightningsvx's Avatar
redlightningsvx redlightningsvx is offline
Collision Refinishing Tech
 
Join Date: Aug 2007
Location: Huntingdon, PA
Posts: 2,279
Registered SVX
replacing water tempgauge

I've been thinking about this for a while and was wondering if I removed the stock temp from the gauge cluster could I use the leads from that to put in something like this in its place? http://store.summitracing.com/partde...5&autoview=sku I ask because since the stock is all electrical do I need to but a sending unit also or can I just use the stock one?
__________________
Seth
94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold
Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats
Soon to come:Fiberglass hood, upholster ALL suede to black leather
Past subies:

92' Pearl White/black top LS-L-SOLD
96' Legacy Outback-TOTALED
99' Legacy Outback Limited 30th anniversary edition-TOTALED
98' Forester L -Totaled
Other toys:
99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap
06' B9 Tribeca-Stock
1982' Yamaha xj650 Maxim
Mods:
work in progress
Reply With Quote
  #2  
Old 12-27-2008, 07:22 PM
Crazy_pilot's Avatar
Crazy_pilot Crazy_pilot is offline
Moar shifty!
Subaru Gold Contributor
 
Join Date: Nov 2006
Location: Toronto, Canada. Eh?
Posts: 4,560
Send a message via MSN to Crazy_pilot
Registered SVX
Re: replacing water tempgauge

While you're at it...

I'd been thinking that the two little status thingies (top left and right on the panel) are basically useless and would serve much better as functional gauges (trans temp and voltage maybe). Do you know if there's anything behind the panel there that would strongly object to having a hole cut in it?
__________________
Chris

92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping
2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos
2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold
2020 Ram 1500 Longhorn - Red Pearl

Reply With Quote
  #3  
Old 12-27-2008, 07:29 PM
redlightningsvx's Avatar
redlightningsvx redlightningsvx is offline
Collision Refinishing Tech
 
Join Date: Aug 2007
Location: Huntingdon, PA
Posts: 2,279
Registered SVX
Re: replacing water tempgauge

Last time I had mine out there were just sockets for lights. I too was thinking of adding another gauge there if I can fit the water gauge in there, but I might have to cut some of the plastic shield also unless I can dremel enough from the cluster.
__________________
Seth
94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold
Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats
Soon to come:Fiberglass hood, upholster ALL suede to black leather
Past subies:

92' Pearl White/black top LS-L-SOLD
96' Legacy Outback-TOTALED
99' Legacy Outback Limited 30th anniversary edition-TOTALED
98' Forester L -Totaled
Other toys:
99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap
06' B9 Tribeca-Stock
1982' Yamaha xj650 Maxim
Mods:
work in progress
Reply With Quote
  #4  
Old 12-27-2008, 10:27 PM
ssnsltd's Avatar
ssnsltd ssnsltd is offline
That's gona leave a mark.
 
Join Date: Nov 2004
Location: Ft Bragg, NC
Posts: 271
Re: replacing water tempgauge

there was a post a few years ago on this, the guy replaced both lower gauges with aftermarkets, can't remember if he put in gauges where the lights are, and I couldn't find the post on a search.

the gauges he put in did not require a mod to the housing. thought he used stock sensors.

anyone have a link to that thread ??
__________________
David
96LSi 102k Laguna Blue
95 LS-L AWD, Safety package, 140k Polo Green

the Chick Magnet:
91 Justy GL EFI 4x4 154k (new motor @120k)

90 Yamaha V-Max
82 Yamaha XJ650LJ Turbo
My Diver Propulsion vehicle:
88 Jeep Cherokee 160k
"U-sta-have"
88 XT6 AWD Pearl,
86 XT Lt Blue,
85 XT AWD/4x4 Turbo Space Blue
Reply With Quote
  #5  
Old 12-27-2008, 11:13 PM
TomsSVX's Avatar
TomsSVX TomsSVX is offline
Maniac modifier
 
Join Date: Dec 2003
Location: Branchburg, New Jersey
Posts: 15,489
Registered SVX Classic SVX
Re: replacing water tempgauge

The dash coolant sender is the single pin sensor on the crossover. It can be removed and replaced with a new sender for the digital gauge with no ill effects on the car's performance or ability to monitor the temp. BUT you cannot remove the two pin sensor next to it.

Tom
Reply With Quote
  #6  
Old 12-28-2008, 07:31 AM
redlightningsvx's Avatar
redlightningsvx redlightningsvx is offline
Collision Refinishing Tech
 
Join Date: Aug 2007
Location: Huntingdon, PA
Posts: 2,279
Registered SVX
Re: replacing water tempgauge

Tom got any pics of the sensors so I have a visual idea?
__________________
Seth
94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold
Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats
Soon to come:Fiberglass hood, upholster ALL suede to black leather
Past subies:

92' Pearl White/black top LS-L-SOLD
96' Legacy Outback-TOTALED
99' Legacy Outback Limited 30th anniversary edition-TOTALED
98' Forester L -Totaled
Other toys:
99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap
06' B9 Tribeca-Stock
1982' Yamaha xj650 Maxim
Mods:
work in progress
Reply With Quote
  #7  
Old 12-28-2008, 07:46 AM
TomsSVX's Avatar
TomsSVX TomsSVX is offline
Maniac modifier
 
Join Date: Dec 2003
Location: Branchburg, New Jersey
Posts: 15,489
Registered SVX Classic SVX
Re: replacing water tempgauge

I don't, take a look at the back driver's side of the engine. Under the manifold in the back corner you will see a single spade connector plugged into a small sensor and then a brown/red connector w/ two wires plugged into the other sensor. They are right next to eachother on the corner of the coolant X-over pipe

Tom
Reply With Quote
  #8  
Old 12-28-2008, 07:56 AM
redlightningsvx's Avatar
redlightningsvx redlightningsvx is offline
Collision Refinishing Tech
 
Join Date: Aug 2007
Location: Huntingdon, PA
Posts: 2,279
Registered SVX
Re: replacing water tempgauge

Thanks, i'll check it out soon.
__________________
Seth
94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold
Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats
Soon to come:Fiberglass hood, upholster ALL suede to black leather
Past subies:

92' Pearl White/black top LS-L-SOLD
96' Legacy Outback-TOTALED
99' Legacy Outback Limited 30th anniversary edition-TOTALED
98' Forester L -Totaled
Other toys:
99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap
06' B9 Tribeca-Stock
1982' Yamaha xj650 Maxim
Mods:
work in progress
Reply With Quote
  #9  
Old 12-28-2008, 07:56 AM
michael's Avatar
michael michael is offline
What Potholes ???
Subaru Bronze Contributor
 
Join Date: Sep 2002
Location: Scranton, PA
Posts: 2,425
Registered SVX
Re: replacing water tempgauge

http://www.subaru-svx.net/forum/showthread.php?t
3 posts down you'll find a pic of my trans temp gauge, I had no problems hacking up the cluster.
Reply With Quote
  #10  
Old 12-28-2008, 08:12 AM
LetItSnow's Avatar
LetItSnow LetItSnow is offline
Still Cant' Say the Z-Word
 
Join Date: Mar 2007
Location: Syracuse, NY
Posts: 2,338
Send a message via AIM to LetItSnow
Registered SVX
Re: replacing water tempgauge

The more recent gauges that were placed in a cluster were VERY small, and mechanical (and not mine, for clarity):

I'd find it hard to believe that any gauge replacement wouldn't require at least some modification to the cluster.

I placed a pair of ISSPROs in my cluster (currently out, being converted to RED ) both on the left side, and I cut an immense amount of plastic out of it to get them to fit, not to mention doing some substantial altering and removal of parts of the circuit sheet behind it.

Is gonna look like this:
__________________
Disclaimer: The above post is on the internet.

Last edited by LetItSnow; 12-28-2008 at 08:27 AM.
Reply With Quote
  #11  
Old 12-28-2008, 12:38 PM
redlightningsvx's Avatar
redlightningsvx redlightningsvx is offline
Collision Refinishing Tech
 
Join Date: Aug 2007
Location: Huntingdon, PA
Posts: 2,279
Registered SVX
Re: replacing water tempgauge

Thanks for the pics. This gives me an idea so far on what needs to be done. Are those gauges 2 1/16, and what is the hieght on them? I ordered a tranny temp gauge first and got a extra cluster coming so i'll post how it goes. I want to get at least the tranny gauge put above the coolant temp for now then if it all fits nice then i'm getting the coolant gauge.
__________________
Seth
94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold
Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats
Soon to come:Fiberglass hood, upholster ALL suede to black leather
Past subies:

92' Pearl White/black top LS-L-SOLD
96' Legacy Outback-TOTALED
99' Legacy Outback Limited 30th anniversary edition-TOTALED
98' Forester L -Totaled
Other toys:
99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap
06' B9 Tribeca-Stock
1982' Yamaha xj650 Maxim
Mods:
work in progress
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:22 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122