The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > FAQs, How To's, & Vendors > How-To Docs & FAQs > Technical Service Bulletins

 
 
Thread Tools Display Modes
  #1  
Old 04-20-2010, 12:39 AM
How-To Doc How-To Doc is offline
How-To Document Administrator
 
Join Date: Apr 2010
Location: SVXWN Country
Posts: 1
Axle Nut/ Lug Nut Tightening Specifications

Axle Nut/ Lug Nut Tightening Specifications

Author: Subaru

TECHNICAL BULLETIN # 294

DATE: 1995

TRANSMISSION: General

SUBJECT: Axle and lug nut

APPLICATION: Service information

AXLE AND LUG NUT SERVICE INFORMATION

It is critical to tighten the axle and lug nuts to factory specifications.

WARNING If the factory tightening specifications are not followed, bearing life will be shortened or mechanical loads will not be spread evenly.

1) Install axle(s) and wheel(s).
2) Install nuts and hand tighten.
3) Lower vehicle until wheels begin to touch the ground.
4) Using figures one and two, tighten nuts to specifications illustrated in the following tables.

Note Some vehicles use torque-to-yield bolts. These bolts should be tightened an additional amount beyond the listed torque specification. The extra amount is listed in degrees.

Acura/ AMC/ Audi/ Buick/ Cadillac/ Chevrolet/ Chrysler/ Daihatsu/ Dodge/ Eagle/ Ford/ Geo/ Honda/ Hyundai/ Infiniti/ Isuzu/ Lexus/ Lincoln/ Mazda/ Mercury/ Mitsubishi/ Nissan/ Oldsmobile/ Peugeot/ Plymouth/ Pontiac/ Renault/ Saab/ Saturn/ Sterling/ Subaru/ Suzuki/ Toyota/ VW/ Volvo/ Yugo


.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:45 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122