SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Wanted Tranny Crossmembers.....:)
Hello All....based on interest in this post by SVXHunter
http://www.subaru-svx.net/forum/show...356#post308356 I am going to start producing the Very nice looking 5 Speed Swap Crossmember For you that need/want it, but don't have the Welder or Bender to do it properly..... So , I am in the Market for as many of the factory Tranny Mounts that I can get ahold of.....Both the rear mount as well as the Round Bar that bolts at the front under the tranny....And Once I get several here, and built, I can have those of you wanting one to swap me your standard mounts for the Done unit as partial core charge.... If you know where to get some, or have them and want to donate or Sell them Let me know..... Please pm me with what you have,and what you want..... Thanks in advance, John in Oregon..... |
#2
|
||||
|
||||
bump!.......
__________________
Matt Locker Link 2015 BRZ Limited 6MT 92 Ebony LS-L ECUtune Stage2av1, Z32 MAF, 370cc injectors, TomsSVX intake, BontragerWorks 22mm RSB #003, HID Hi and Lo beams, OT endlink and bushing mods, PWR Aluminum radiator, Harvey's QC shift kit, 2.5" flowmaster 80 exhaust, 17" Michelin Pilot Sport A/S, Poly sway bar bushings, Slotted Bradi rotors, AFBeefcake powdercoated calipers, 97 grill, and a huge set of air horns. 300,000 miles and counting 92 Ebony LS-L. ecutune stage1v4, motorsport 1pc pulley. Garage Queen - sold to Dad in upstate NY 155,000 miles 19 Subaru Ascent Premium - -Hers !. 89 DL 4x4 little red wagon - a.k.a. The immortal suby. 275k R.I.P. |
#4
|
||||
|
||||
Immediate need for cross member
John,
I have an immediate need for a trans cross member for my WRX transmission. I have access to a welder. Any pictures of the meber you fabricated? How quickly can you wip one up? Thanks, Marc |
|
|