Interesting perspective of an SVX

[Numbchux]

I got a wrecked parts car this summer for the rear subframe to resurrect the '97 that I have. I pulled the engine/transmission a month or so ago. This weekend I pulled the one "good" body panel, the RH door, and the rear quarter roll-down glass (curved part was broken already), and set about getting to the rear suspension however I needed to...


2018-07-31_08-28-28 by Numbchux, on Flickr


20181001_185102 by Numbchux, on Flickr


20181002_180450 by Numbchux, on Flickr


20181002_180831 by Numbchux, on Flickr

It was very odd, when I picked up the car (changed hands at least 3 times since the accident about 10 years ago, so the history is a little foggy), someone had dissassembled the RH suspension to pop the axle out of the diff, and just plain cut the LH axle shaft. When I started disconnecting the driveshaft I realized why, the rear diff is seized solid

Got the exhaust off, dropped the diff with the driveshaft attached, broke loose several of the subframe bolts. Nothing putting up a major fight, yet. Left it soaking in BG penetrating oil. I'm cautiously optimistic on this project.