The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > Regional SVX Forum & Clubs > Down Under
Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 01-03-2015, 02:57 PM
SURTEESS's Avatar
SURTEESS SURTEESS is offline
Registered User
 
Join Date: Oct 2006
Location: Auckland, New Zealand
Posts: 1,421
Air-Con controller repairs (1 of 2)

Since all work has been done around house - and real work starts tomorrow, I decided to fix as many of the controlllers as possible... only took me 2 hours to fix 4 of them, the rest are toast due to plugging/unplugging while ignition was turned on (no diode protection on micro pins).

Now there should be a couple of people in NZ with cool air for summer...


I must thank Shane for cutting the connector wires from his old wrecked SVX - I managed to make up a test system outside of the car..... just waiting to confirm that all is right within a car - so waiting for Shane to arrive in Auckland in order that we plug each one in.
Attached Images
File Type: jpg SAM_0217.JPG (961.1 KB, 168 views)
File Type: jpg SAM_0218.JPG (956.9 KB, 151 views)
File Type: jpg SAM_0219.JPG (998.5 KB, 157 views)
File Type: jpg SAM_0220.JPG (970.7 KB, 155 views)
File Type: jpg SAM_0221.JPG (954.5 KB, 152 views)
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.

Last edited by SURTEESS; 01-03-2015 at 07:01 PM.
Reply With Quote
  #2  
Old 01-03-2015, 02:59 PM
SURTEESS's Avatar
SURTEESS SURTEESS is offline
Registered User
 
Join Date: Oct 2006
Location: Auckland, New Zealand
Posts: 1,421
Air-Con controller repairs (2 of 2)

some more pictures only..............
Attached Images
File Type: jpg SAM_0222.JPG (966.2 KB, 141 views)
File Type: jpg SAM_0223.JPG (976.4 KB, 150 views)
File Type: jpg SAM_0224.JPG (982.1 KB, 152 views)
File Type: jpg SAM_0225.JPG (976.2 KB, 132 views)
File Type: jpg SAM_0226.JPG (976.6 KB, 143 views)
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122