SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
stop lamp light on.
i think my stop lamp checker box is toast. i'm getting the "stop lamp" light every time i hit the brakes, at first it was intermittent, but now it's every time. i replaced all the brake(4) lights with new matching ones but it didn't fix it. all lights are working, brake switch working, and fluid full. does anyone know where the ground is so i can check that? i can't think of anything else, any ideas out there?
if this ends up being the stop lamp checker does any one know if cutting the b22 wire really bypasses the box and does it have any adverse effects? |
#2
|
||||
|
||||
The stop lamp checker P/N is 88081PA000 and is around $35.00 from subaruparts.com.
It is very easy to replace. It is behind the right side trunk trim in front of the rear washer fluid reservoir. .
__________________
. Subaru Ambassador 1996 Polo Green LSi #216..138,100 miles...SOLD JFICX8659TH100216.....Date of Manufacture: November 16, 1995..... Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan In-Service Date: January 2, 1997 "The Pristine Green Polo Machine” First Polo Green on the Network First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000) First 5000K HID factory fog lights (2007) First SVX JDM BBS wheels on a USDM SVX (2013) HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler. R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016 2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback 2007 Mazda Miata MX-5 PRHT...102,000 miles. Plenty of parts, service and windshields. 4th Registered Network member —2/21/2001 My NEW locker..I...My Email..I..Wikipedia/SVX . . |
#3
|
|||
|
|||
thanx, but i would like to bypass this if all it does is tell me when my tail lights are out...if that's all it does? any tried the bypass?
|
#4
|
||||
|
||||
"STOP LAMP" has absolutely nothing to do with brake fluid.
__________________
Disclaimer: The above post is on the internet. |
#5
|
||||
|
||||
__________________
. Subaru Ambassador 1996 Polo Green LSi #216..138,100 miles...SOLD JFICX8659TH100216.....Date of Manufacture: November 16, 1995..... Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan In-Service Date: January 2, 1997 "The Pristine Green Polo Machine” First Polo Green on the Network First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000) First 5000K HID factory fog lights (2007) First SVX JDM BBS wheels on a USDM SVX (2013) HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler. R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016 2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback 2007 Mazda Miata MX-5 PRHT...102,000 miles. Plenty of parts, service and windshields. 4th Registered Network member —2/21/2001 My NEW locker..I...My Email..I..Wikipedia/SVX . . |
#6
|
|||
|
|||
Letitsnow, don't bet your car on it. i didn't believe it either till i saw this thread, http://www.subaru-svx.net/forum/show...+checker+fluid ...but i checked and it makes sense to me now.
ps. thank you svxcess that's exactly what i was looking for. |
#7
|
|||
|
|||
Quote:
dcb |
#8
|
||||
|
||||
I'll bet my car on it. Check out the wiring diagram?
Consider: Why would the BRAKE light and the STOP LAMP light both be wired to verify an appropriate fluid level? This isn't the case, and it wouldn't make much sense if it was.
__________________
Disclaimer: The above post is on the internet. Last edited by LetItSnow; 03-10-2008 at 12:43 PM. |
#9
|
|||
|
|||
it's not worth my time to check, i was just going off what some one with over 6,000 posts here said "stop lamp".
neither here nor there, for any one wanting to by pass the stop lamp checker box all you have to do is disconnect the 4 wire harness connecting into the checker box and put a little jumper wire from white w/ red wire to white w/ black (at least that's what color mine are, they are also the two bigger wires) here's some pics of what i did.....0310081546.jpg this one shows how rusty my box was inside and what i did for a jumper....0310081545.jpg do this at own risk, if i run into any problems with the bypass i will post, but for now i'm brake lamp free again |
#10
|
||||
|
||||
Mine is on all the time too. Only because I replaced the factory lights with LED's since they are brighter and light up faster. However, since they take less power to run, the module thinks that a light is out.
Oh well, I'd rather have bright lights... and this way I know everytime I push on the brake. I guess I've gotten used to the light. *shrug*
__________________
Jesus is the remedy 2015 Expedition EL Ecoboost Ebony Pearl '95 Subaru SVX LSi Home of the Bontrager Works 22mm rear sway bar!! |
#11
|
|||
|
|||
the bypass takes maybe 10 minutes and should do away with your problem, plus it's 100% reversable and takes less time to remove.
**for everyone currently without a stop lamp checker problem if you want keep from having a problem i suggest you flip this box 180 degrees. the way it was mounted from the factory will inevetably get water in it and rust out. should only require a 10mm socket or wench and something to bend that tab(hammer or vice grips) that should save you $30 or so. |
#12
|
||||
|
||||
Mine comes on now whenever I hit the brake. I had a friend hit the brake while I checked the back and sure enough, the middle-passenger's brake lamp is out. All four lights come on if I turn the headlights on, but when I press the brake that one doesn't come on. Ah well, bulb time. At least it's not my checker.
|
#13
|
|||
|
|||
was that after the bypass? or just what's been going on with your stop lamp?
|
#14
|
||||
|
||||
Why not just take the bulb out
in the dash...
|
#15
|
||||
|
||||
My stop lamp checker worked properly. I replaced the bulb and the problem is gone.
|
|
|