SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
How do I fix this :(
O.k it started with just the top of the driver side door being alittle loose. then it all 3 of what ever is holding it in broke, it is not hanging off but worries me because it is very loose, Anyone ever encountered this before? Because I wanna fix this, it is bothering me.
__________________
1994 SVX L - FWD Barcelona Red 190K miles ~ SOLD 1994 SVX LS - 5spd AWD Emerald Green 202k miles PWR Radiator, HID 5000k, New paint job with issues, 17" STI BBS wheels, converted to 5spd AWD from FWD. Purchased from SVXyGirl 2/20/09 -- Undergoing complete rebuild 1993 Justy 4wd 5door- Teal of sorts , beater. 2008 OBXT Newport Pearl 65k miles |
#2
|
|||
|
|||
kinda looks like you might be able to glue it, if not, time for a new door panel
__________________
1991 xt6 eg33? 1993 gc track car |
#3
|
||||
|
||||
Take the door panel completely off and look to see if anything is (was) fastening behind it.
That's looking pretty rough. I have never heard of anyone disassembling the door panel. Glue might just be the answer.
__________________
"That which can be asserted without evidence can be dismissed without evidence." '92 Dark Teal SVX LS-L, >146,000m 3 pedals, 5 speeds., restoration underway. 2012 Honda Insight, slow but cute. |
#4
|
||||
|
||||
It's been a while since I've had my door panels off, but I believe that part is held on by little plastic rivets. You should be able to replace them with some small screws without it being noticeable.
__________________
-Steve Member #895(the member formerly known as BurgundyBeast) 01' MSM Lexus IS300 |
#5
|
||||
|
||||
yep i couldnt get that woodgrain panel off the door so broke the original clips altogether then pop-riveted it back on,, the back is just hard cardboard so i used some made up washers to hold the rivets properly from the back ... was quick and easy prob 10mins start to finish ( wanted the panel off to paint the woodgrain which is now black) and looks great im planning doing it to all my woodgrain as its very faded and looks tacky .. iv tried getting those dash kit cover things but have had no luck sourcing for a right hand drive ... yes iv tried smallcar..... they said no
|
#6
|
||||
|
||||
Is it difficult to remove the door panel?
On a different note, where does the hose, from what looks like a fuel something, (The black cylinder beside the ABS ) go ? it seems weird it is just sitting there. Looks like it is suppose to be plugged in somewhere. Its coming from the bottom on the Cylinder.
__________________
1994 SVX L - FWD Barcelona Red 190K miles ~ SOLD 1994 SVX LS - 5spd AWD Emerald Green 202k miles PWR Radiator, HID 5000k, New paint job with issues, 17" STI BBS wheels, converted to 5spd AWD from FWD. Purchased from SVXyGirl 2/20/09 -- Undergoing complete rebuild 1993 Justy 4wd 5door- Teal of sorts , beater. 2008 OBXT Newport Pearl 65k miles Last edited by Wikedjuggalo; 10-28-2007 at 07:18 PM. |
#7
|
||||
|
||||
Quote:
The canister thing is a charcoal canister to reduce emissions. There should be an elbow shaped piece which attaches it to fender well.
__________________
-Steve Member #895(the member formerly known as BurgundyBeast) 01' MSM Lexus IS300 |
#8
|
||||
|
||||
Thanks you for the quick reply, I have no school tomorrow but work so I should be able to get this problem fixed thanks to this networks help.
__________________
1994 SVX L - FWD Barcelona Red 190K miles ~ SOLD 1994 SVX LS - 5spd AWD Emerald Green 202k miles PWR Radiator, HID 5000k, New paint job with issues, 17" STI BBS wheels, converted to 5spd AWD from FWD. Purchased from SVXyGirl 2/20/09 -- Undergoing complete rebuild 1993 Justy 4wd 5door- Teal of sorts , beater. 2008 OBXT Newport Pearl 65k miles |
#9
|
||||
|
||||
Quote:
|
Thread Tools | |
Display Modes | |
|
|