SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
hard line on water x-over. No gasket?
Since my engine is going into a 911, there are a lot of things that I won't need. Mostly when refering to the cooling system. There is a hard line that is on the rear passanger side of the water x-over. I removed it tonght because I need to bolck it off/weld it closed. It was a PITA to get off. When I did finally pull the thing off, I noticed that there was no gasket, O-ring or anything sealing it. Is this normal? Is it just a pressure fit/slip fit?
|
#2
|
|||
|
|||
Anybody ever removed this?
|
#3
|
||||
|
||||
Nah, no gasket... I try not to disconnect them
tom |
#4
|
|||
|
|||
where does that line usually feed? Heater core?
|
#5
|
||||
|
||||
yeah......
__________________
Dave - 03 Baja - 92 SVX - 86 Brat - 08 OB 3.0 |
|
|