5mt wiring help

[LiquidForce]

I have read through the directions on how to wire up the clutch pedal/neutral switch but I am not quite following it.


from Tom's write up

53. Place 2 female connectors on the ends of 2 lengths of wire. Plug them into the upper neutral safety switch on the brake/clutch pedal assembly. Route the wires over to the auto wiring harness where they will be spliced into the Blue/White and Black/Yellow wires (right next to each other) This will allow for you to start the car when the clutch pedal is depressed.


Are the Blue/White and Black/Yellow wires on tcu harness connections or the ecu harness connectors? Anyone have a picture?