SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
|
||||
|
||||
need u joints for driveshaft
as titled, i need the u joints for a 92 ls-l driveshaft. my cousin told me they dont sell them on the subaru dealser and the only place is aftermarket where i can get them. thanks
|
#2
|
||||
|
||||
Re: need u joints for driveshaft
Quote:
Are your's singing like mine have started to do? Otherwise, a Drive Shaft shop, or buy a new full assembly of the shaft. My local dealer says he can get the whole assembly, but it's over $500
__________________
The Worm _______________ June '91 Claret LSL #1733, Enkei RS-5's x 16", Original Paint, accompanied by Beautifully speckeled Front Bumper, Sony Audio Components, Small Car Shift Kit, "How to" Hood Lifts {Perfect}, "15 Minute Suspension Mod" Motorsport Floor Mats. Perma-Cool External T. Filter, New Front Axels {1/2008}. "Classic Radiators" unit "$36 coil alternative" and Tranny rebuild at 287k 8/2012 '05 Infinity G35 Coupe. No Mods, 33K Miles |
#3
|
||||
|
||||
Re: need u joints for driveshaft
Quote:
|
#4
|
||||
|
||||
Re: need u joints for driveshaft
If the 94 Lsi are the same, I have them. Make offer.
__________________
1995 POLO LSI 76K MILES SOLD |
#5
|
||||
|
||||
Re: need u joints for driveshaft
Can anyone clarify whether or not these can be replaced, with a little talent????? I know the issue would be RPM balance, so I'm not forgetting that part.
__________________
The Worm _______________ June '91 Claret LSL #1733, Enkei RS-5's x 16", Original Paint, accompanied by Beautifully speckeled Front Bumper, Sony Audio Components, Small Car Shift Kit, "How to" Hood Lifts {Perfect}, "15 Minute Suspension Mod" Motorsport Floor Mats. Perma-Cool External T. Filter, New Front Axels {1/2008}. "Classic Radiators" unit "$36 coil alternative" and Tranny rebuild at 287k 8/2012 '05 Infinity G35 Coupe. No Mods, 33K Miles |
#6
|
||||
|
||||
Re: need u joints for driveshaft
U CAN GET THEM from advance auto. they are approx 30 bux a piece. I would not recommend doing them without a shop press. It will take you hours to get that thing out unless u cut with something. have a great day
__________________
Eric Rebuilt P/S pump info... http://www.subaru-svx.net/forum/showthread.php?t=50918 If your car wont start info... http://www.subaru-svx.net/forum/show...ighlight=click |
#7
|
||||
|
||||
Re: need u joints for driveshaft
im not sure, im new in the subaru world actually.
cool, do u know how many of them i will need for the svx? |
#8
|
|||
|
|||
Re: need u joints for driveshaft
From the schematic I believe there are 3 in total. 2 on the front shaft and 1 on the rear.
|
|
|