SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
|
|||
|
|||
Koni/GC install issues
I've asked around to a number of members here regarding my koni/gc install issue, the issue being that my front passengers side koni is completely extended and essentially holding the entire hub assembly from falling to the ground. Many have said this is normal, even koni and ground control confirmed this, however, my issue may be the anomaly. Because now that i have the remaining 3 corners installed, the front passenger side is the only one giving me this issue.
The real problem now is that the hub assembly is so low to the ground i can't the tire on. The car is on 4 jacks. the 3 other tires cleared fine. So what gives? The only other thing i did was front sway bar bushings and stabilzer links on each side in the front. Thoughts/suggestions are appreciated, because now after 2 months of trying to get this project done this is what is holding me up! Thanks in advance, chris |
#2
|
||||
|
||||
Re: Koni/GC install issues
Any odds of a picture?
__________________
Disclaimer: The above post is on the internet. |
#3
|
||||
|
||||
Re: Koni/GC install issues
What's more odd to me is why is this the only one? They should all be like that.
What position is the spring adjustment? Is the spring perch welded is a different spot?
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#4
|
|||
|
|||
Re: Koni/GC install issues
Here are some pics that will hopefully explain the situation better....
|
#5
|
|||
|
|||
Re: Koni/GC install issues
and one more...
|
#6
|
||||
|
||||
Re: Koni/GC install issues
It looks pretty familiar to me! I'm guessing you're going to bring the perch up a ways?
__________________
Disclaimer: The above post is on the internet. |
|
|