SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
WTB: Conical Intake
I'd like to get a conical air filter to replace the OEM filter box. If you have one you'd like to sell, let me know!
|
#2
|
|||
|
|||
Re: WTB: Conical Intake
I have a conical filter with an adapter plate which attaches to the mass airflow sensor with 4 bolts and replaces the stock air box. Is this what you're looking for?
|
#3
|
|||
|
|||
Re: WTB: Conical Intake
Yes, that's exactly what I'm looking for! Can you send me a private message with a price?
|
#4
|
|||
|
|||
Re: WTB: Conical Intake
I'll weigh it and send you a price with shipping shortly.
|
#5
|
|||
|
|||
Re: WTB: Conical Intake
2 things, most of what your looking for can be bought at any local auto parts chain store, advanced auto, auto zone, orielly's.
And 2 if your keeping the filter in the engine bay where the stock box sits your going to be getting warm air flow which is going to hurt performance, stock box pulls cold air from the wheel well area. there is a resonator in the fender well that you could remove if you want faster air flow, or you could put piping through the fender with the air filter in the wheel well. That is what I did. Last edited by 92 SVX; 08-18-2015 at 09:52 AM. |
#6
|
||||
|
||||
Re: WTB: Conical Intake
Whats with the battery in your car - is it laying down on its side ?????
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted. |
#7
|
|||
|
|||
Re: WTB: Conical Intake
Personal message sent.
|
#8
|
|||
|
|||
Re: WTB: Conical Intake
Yes it is, its one of the AGM batteries, this particular battery is also 1000 Cranking Amp 12V motorcycle battery.
|
#9
|
|||
|
|||
Re: WTB: Conical Intake
Thanks for the tip, 92 SVX.
The part I'm not sure about is attaching the cone to the MAF. Do I need a custom piece for that? |
#10
|
|||
|
|||
Re: WTB: Conical Intake
Yes you do, unless you butcher the MAF to remove the flat plate with the 4 bolt holes. You can then attach it with a hose clamp but can not go back to the stock air box.
Let me know if you are still interested in my pre-made one and I'll send you pics. |
#11
|
|||
|
|||
Re: WTB: Conical Intake
Blackey, I am still interested. Could you send me a picture?
|
#12
|
|||
|
|||
Re: WTB: Conical Intake
I received the cone and adapter! Thanks Blacky.
|
#13
|
|||
|
|||
Re: WTB: Conical Intake
Wow, that was fast. You're very welcome.
|
|
|