SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Urgent!!!!! Help!!!needed!!!
I need to know the part number/s for the gaskets that connect the stebro euro resonator to the pipes coming off the header. Heres an illustration of what exactly I need
The guy at the exhaust shop said they are 2 small gaskets that I need. Any help will be greatly appreciated.
__________________
Frank 1995 SVX L(mods: slotted/bored raceconcepts rotors,full stebro cat-back exhaust,green cone air-filter,rust ) 116,000 mi My Locker |
#2
|
||||
|
||||
The stock gaskets are part # 44022PA021 and are $15.37 from subaruparts.com.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#4
|
||||
|
||||
they should if they dont new fitting ones should have came in the kit
__________________
- John ASE certified Master Tech W/ X1 Twin City Fleet repair, St. Paul, MN need work done? Have tools will travel
|
#6
|
||||
|
||||
Quote:
__________________
Frank 1995 SVX L(mods: slotted/bored raceconcepts rotors,full stebro cat-back exhaust,green cone air-filter,rust ) 116,000 mi My Locker |
#7
|
||||
|
||||
are those the gaskets that look like dounuts? based on the pictue they should fit... does the shop its at weld?
__________________
- John ASE certified Master Tech W/ X1 Twin City Fleet repair, St. Paul, MN need work done? Have tools will travel
|
#9
|
||||
|
||||
Anybody know if I can purchase those gaskets from somewhere other than subaruparts.com?
__________________
Frank 1995 SVX L(mods: slotted/bored raceconcepts rotors,full stebro cat-back exhaust,green cone air-filter,rust ) 116,000 mi My Locker |
#10
|
||||
|
||||
Would this work? http://www.napaonline.com/masterpage...Num=44022PA021
__________________
Frank 1995 SVX L(mods: slotted/bored raceconcepts rotors,full stebro cat-back exhaust,green cone air-filter,rust ) 116,000 mi My Locker |
#11
|
||||
|
||||
looks the same i would check the exhaust diametar first but at 3.40 what do you have to loose by trying?
__________________
- John ASE certified Master Tech W/ X1 Twin City Fleet repair, St. Paul, MN need work done? Have tools will travel
|
#12
|
||||
|
||||
The stock gaskets may be too small. Any exhaust shop should be able to provide larger ones.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#13
|
||||
|
||||
well, I just went to the local napa parts store and ordered the gaskets that were on their site. I hope these fit. If not, then I dont know what I'm gonna do. The car sounds like crap. The shop I took it to had a bunch of gaskets but not in my size.
__________________
Frank 1995 SVX L(mods: slotted/bored raceconcepts rotors,full stebro cat-back exhaust,green cone air-filter,rust ) 116,000 mi My Locker |
#14
|
|||
|
|||
and they dont know how to weld...why dont you put a new flange on it ect bla bla and make it work at a muffler shop????
__________________
---Travis--- |
#15
|
||||
|
||||
Ok, I just got an email from Stebro Dan and he said the size of the gaskets is 175" id.
__________________
Frank 1995 SVX L(mods: slotted/bored raceconcepts rotors,full stebro cat-back exhaust,green cone air-filter,rust ) 116,000 mi My Locker |
|
|