The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > FAQs, How To's, & Vendors > How-To Docs & FAQs > Technical Service Bulletins

 
 
Thread Tools Display Modes
  #1  
Old 04-20-2010, 06:45 PM
How-To Doc How-To Doc is offline
How-To Document Administrator
 
Join Date: Apr 2010
Location: SVXWN Country
Posts: 1
Fuel Injector Replacement

Fuel Injector Replacement

Author: Subaru

NUMBER: 09-34-96

DATE: 09/13/96

APPLICABILITY:
LEGACY, IMPREZA, AND SVX WITH EGR

SUBJECT:
FUEL INJECTOR REPLACEMENT

If you should receive a customer complaint of a Legacy, Impreza, or SVX being difficult to start, after a long cool down period (such as overnight) under extremely cold temperatures and high relative humidity, it has been found that under these conditions ice may build up at the tip of the injector and cause a no start or hard start condition. OBDII equipped vehicles will illuminate the MIL and exhibit trouble codes, P0301, P0302, P0303, P0304 (P0305 and P0306 for SVX).

A newly designed injector is now available to prevent the condition. All injectors should be replaced with the newly designed injector as a set of 4 (6 for SVX).

DUE TO THE FACT THAT THIS WILL ONLY OCCUR UNDER SPECIFIC DRIVING CONDITIONS, AS DESCRIBED ABOVE, REPLACEMENT OF INJECTORS MUST BE PERFORMED ONLY AFTER CONFIRMING THE CAUSE IS RELATED TO THOSE CONDITIONS.

Please note :

1) The repair procedure outlined in this bulletin is only to be applied on an individual complaint basis and to be supported by a fully documented dealer repair order describing the customer complaint and any trouble codes present.

2) Removed injectors will be remanufactured. Therefore, all injectors must be handled with care to ensure proper core credit. Refer to Service Bulletin # 09-33-95 for proper removal techniques to avoid damage. Take care during storage and shipment to avoid damage. When returning injectors, be sure to package each injector in its original box. If the original boxes are not available, be sure each injector in a shipment is individually protected.

The new style injectors have been installed in production, beginning with the following VIN's:

Legacy:......T*900001 (4-door Sedan)
.................T*930001 (Station Wagon)
.................T*970001 (Outback)

Impreza:......T*412592 (2-door Coupe)
..................T*512557 (4-door Sedan)
..................T*813658 (Station Wagon)

SVX:...........T*100737

New style injectors have applicability as listed.


.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:12 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122