SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
View Poll Results: Have you fixed/replaced the muffler heatshield? | |||
Fixed | 2 | 33.33% | |
Replaced | 0 | 0% | |
Never checked/don't know | 3 | 50.00% | |
Still good | 1 | 16.67% | |
Voters: 6. You may not vote on this poll |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Less common heat shield rattle?
Just curious if anyone else has had to fix replace the heatshield above the muffler.
There's 6 bolts holding this heat shield on. The back left and right bolts has pulled through the shield and the back center bolt was on its way. The front bolts were fine. For those with rattles definately check this one out. It would rattle at 1600-1700 RPM as well as over 3000 RPM. I fixed mine by adding large washers to the 3 rear bolts. (Don't forget to vote)
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! Last edited by Earthworm; 09-08-2005 at 11:57 AM. |
|
|