SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
how to replace my knock sensor
Is there a link or does any body have a how to for replacing the knock sensor? I have 1 1992 LSL
|
#2
|
||||
|
||||
Do a search of the site. There are actually two knock sensors - one for each bank of cylinders. The passenger's side one isn't all that bad to get to. The driver's side requires a lot of patience. You'll have to remove the alternator to get to them.
-Bill
__________________
Retired NASA Rocket Scientist Most famous NASA "Child" - OSIRIS-REx delivered samples from asteroid BENNU to Earth in Sept. 2023 Center Network Member #989 '92 Fully caged, 5 speed, waiting for its fully built EG33 '92 "Test Mule", 4:44 Auto, JDM 4:44 Rear Diff with Mech LSD, Tuned headers, Full one-off suspension '92(?) Laguna, 6 spd and other stuff (still at OT's place) My Locker |
#3
|
|||
|
|||
I did the drivers side one. It wasnt too hard. Just required patience. Do a search and you will find alot of information.
|
#4
|
||||
|
||||
The easy (and probably more costly) way would be to remove the intake.
The way I changed mine was to tape 2 wrenches locked together for the added reach.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#5
|
|||
|
|||
Step by step:
http://www.subaru-svx.net/forum/show...threadid=17952 Last edited by dwd1985; 03-20-2006 at 06:14 PM. |
|
|