SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
|
||||
|
||||
Boot lock picture required
Hi there,
looking for a picture (both sides) of the rear boot lock mechanism (out of car). My boot light is on all the time and have checked wiring only to find that the switch is earthed all the time regardless if open or shut. Therefore I have come to the conclusion that the switch must be missing an isolating plastic piece when closed. TIA
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted. |
#2
|
||||
|
||||
Re: Boot lock picture required
I did some searching and found these pictures of the lock unit outside the car. Not sure if it will help you but its worth a try. There are multiple pictures in each eBay listing.
https://www.ebay.com/itm/1995-Subaru....c100005.m1851 https://www.ebay.com/itm/1995-Subaru...dZrej9&vxp=mtr
__________________
1994 SVX LSi JDM Tailbar and Grill, Clear Corners, 15min-mod, Nevin Blue RSB, G-FORCE SPORT COMP-2 Tires, Phenolic Spacers (Manifold & Throttle Body), SS Brake Lines, Maniac Electric Motors 160A Alternator 2008 Legacy 3.0R |
|
|