Arghh!! Need 3.3L Cam, Pulley

[hisport]

The best laid plans....

I bought a low mile '92 with front end damage as an engine donor (for a Vanagon transplant). The car is in amazingly good shape, yet now that I have the motor out, I find that the LH ex cam pulley got hit hard, snapping off the cam just behind the seal. Arghhh!!

So, can anyone help? At a minimum I need

1. LH Ex cam (not sure if interchangeable with RH side)

2. LH Cam Pulley

3. All cam cover plastic

4. LH cam position sensor and bracket

Alternately, a LH head assembly would do it.

many Thanks,

john

[SVXRide]

Originally Posted by hisport

The best laid plans....

I bought a low mile '92 with front end damage as an engine donor (for a Vanagon transplant). The car is in amazingly good shape, yet now that I have the motor out, I find that the LH ex cam pulley got hit hard, snapping off the cam just behind the seal. Arghhh!!

So, can anyone help? At a minimum I need

1. LH Ex cam (not sure if interchangeable with RH side)

2. LH Cam Pulley

3. All cam cover plastic

4. LH cam position sensor and bracket

Alternately, a LH head assembly would do it.

many Thanks,

john

1. I don't believe the cams are interchangeable (thus the LH, RH stamps)
2. The pulleys are definitely different

Drop me a PM, I may have a spare cam and plastic cover

-Bill