SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Poly steering rack bushings
While I'm under the car doing stuff I decided to try something out. I got the polyurethane rack bushings for an '02 WRX(whiteline part #KSR202) and decided to see how they fit on the car. While one bushing is square unlike ours, I think it fit pretty well. The bushings are a little small..... On the pass. side the gap is in the area against the crossmember. You do get a good clamp on it, though. The gap is about 7/16 to 1/2 inch. I was able to place the drivers side split so that it rests on the clamp split line. The gap here is smaller than the pass. side. Here are some pics.
__________________
'92 SVX LS Pearl White - 6mt |
#2
|
|||
|
|||
Re: Poly steering rack bushings
Great Job!
The bushings look like they fit well. Are those the 30mm bushings?
__________________
1992 Subaru SVX LS-L 1995 Subaru SVX LSi |
#3
|
|||
|
|||
Re: Poly steering rack bushings
I'm not sure what their size is. I just ordered the ones for a 2002 WRX from TurninConcepts. Other Subaru parts vendors should have them as well.
__________________
'92 SVX LS Pearl White - 6mt |
#4
|
|||
|
|||
Re: Poly steering rack bushings
I'll take a look at Whiteline's site. How does the steering feel with the new bushings?
__________________
1992 Subaru SVX LS-L 1995 Subaru SVX LSi |
#5
|
|||
|
|||
Re: Poly steering rack bushings
can't take it for a drive till I get the 6 speed in.
__________________
'92 SVX LS Pearl White - 6mt |
|
|