SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Accessing the lighter socket/housing
I am in the process of replacing my OEM stereo with a 2003 Outback 6-disc unit. While I have the stereo assy. out, I was going to replace the lighter socket and housing.
This is not as straightforward as I was thinking it would be - it appears the socket housing is attached by screw from below. So does this mean the center console must be removed to get to it? I did not find a guide for this in the how-to locker. Anyone have some words of experience here before I take things apart that may not require taking apart?
__________________
Jerry 2005 Baja Turbo 2008 Ford Crown Victoria Police Interceptor jnj7707@yahoo.com |
#2
|
|||
|
|||
Re: Accessing the lighter socket/housing
I was just looking at that same area today, and yes, the center console has to come out to access the bottom of 2 screws that secure it. What a pita. Actually looks like you could replace the socket without, if you were a contortionist with small hands. You'll need a right-angle ratcheting screwdriver at a minimum even with the center console out, as it's actually shown as part of the instrument panel.
Glenn
__________________
"The only thing necessary for the triumph of evil is for good men to do nothing" Aaron Burke 1993 25th Anniversary Edition #63 of 301. R.I.P. Rojo 7/24/2008 She saved my life! 1997 Ebony Mica Pearl LSI. BLACKBERRY 1998 5-Spd Legacy GT Wagon in Glacier White: NUBURU 2005 Cadillac STS in Sandstorm Metallic: STORMY Veteran and farthest traveler of 1st SoCal2MuseumsMeet2010. http://www.subaru-svx.net/photos/user.php?RojoRocket Last edited by RojoRocket; 11-11-2008 at 06:44 PM. |
#3
|
||||
|
||||
Re: Accessing the lighter socket/housing
As far as I remember the lighter housing pulls out =D. I have had mine out a couple of times. I assume that is what you are talking about.
__________________
1994 SVX L - FWD Barcelona Red 190K miles ~ SOLD 1994 SVX LS - 5spd AWD Emerald Green 202k miles PWR Radiator, HID 5000k, New paint job with issues, 17" STI BBS wheels, converted to 5spd AWD from FWD. Purchased from SVXyGirl 2/20/09 -- Undergoing complete rebuild 1993 Justy 4wd 5door- Teal of sorts , beater. 2008 OBXT Newport Pearl 65k miles |
#4
|
||||
|
||||
Re: Accessing the lighter socket/housing
I was just looking at that same area today, and yes, the center console has to come out to access the bottom of 2 screws that secure it. What a pita. Actually looks like you could replace the socket without, if you were a contortionist with small hands. You'll need a right-angle ratcheting screwdriver at a minimum even with the center console out, as it's actually shown as part of the instrument panel.
Glenn or As far as I remember the lighter housing pulls out =D. I have had mine out a couple of times. I assume that is what you are talking about. Hmmmmmmm......... Well, I certainly thought or should I say hoped that the housing would just snap out (upwards) with the electrical socket assembly attached. But yeah upon looking at the thing with the stereo head unit/cage removed, it appears to be attached from below with screws. Seems like a funky way to attach the thing. Wikkedjuggalo, there are two posts that go down from the housing, do those not contain screws?
__________________
Jerry 2005 Baja Turbo 2008 Ford Crown Victoria Police Interceptor jnj7707@yahoo.com |
#5
|
|||
|
|||
Re: Accessing the lighter socket/housing
Quote:
Glenn
__________________
"The only thing necessary for the triumph of evil is for good men to do nothing" Aaron Burke 1993 25th Anniversary Edition #63 of 301. R.I.P. Rojo 7/24/2008 She saved my life! 1997 Ebony Mica Pearl LSI. BLACKBERRY 1998 5-Spd Legacy GT Wagon in Glacier White: NUBURU 2005 Cadillac STS in Sandstorm Metallic: STORMY Veteran and farthest traveler of 1st SoCal2MuseumsMeet2010. http://www.subaru-svx.net/photos/user.php?RojoRocket |
#6
|
||||
|
||||
Re: Accessing the lighter socket/housing
Hope you got the 03 Lego radio that doesn't require any changes to the cover. I think the one from a 03 GT (not the Macicrap) looks about as perfect as a non stock radio can look in mine. Fit like a glove. Only wish it had a mp3 input.
__________________
British vehicles are my last ditch attempt to keep the nasty Italian thoughts in my mind at bay. So far its working. |
#7
|
||||
|
||||
Re: Accessing the lighter socket/housing
Yes that's the one. No grinding required for the cover and I think it looks like it was made for the SVX.
__________________
Jerry 2005 Baja Turbo 2008 Ford Crown Victoria Police Interceptor jnj7707@yahoo.com |
#8
|
||||
|
||||
Re: Accessing the lighter socket/housing
Are you trying to remove the plastic or the actual metal ? Correct me so I can let ya know. I've torn that part of the car apart many times =D had a few stereo's in there.
No those "post" do not I can freely take mine in and out because one of the broke =D. On my car at least let me say that. Thats it I'm going out to the car Alright sorry about the confusion. Mine is broke =D I just checked and there is a screw there but that seems pretty stupid. The part broke off I guess and basically clips on the screw. Yes I am wrong there are screws in yours.
__________________
1994 SVX L - FWD Barcelona Red 190K miles ~ SOLD 1994 SVX LS - 5spd AWD Emerald Green 202k miles PWR Radiator, HID 5000k, New paint job with issues, 17" STI BBS wheels, converted to 5spd AWD from FWD. Purchased from SVXyGirl 2/20/09 -- Undergoing complete rebuild 1993 Justy 4wd 5door- Teal of sorts , beater. 2008 OBXT Newport Pearl 65k miles Last edited by Wikedjuggalo; 11-11-2008 at 07:43 PM. |
#9
|
||||
|
||||
Re: Accessing the lighter socket/housing
Yes I'm taking off the plastic and the actual metal
OK thanks for confirming my worst fears on the screws. Now I get to discover all the joys of taking my console apart.
__________________
Jerry 2005 Baja Turbo 2008 Ford Crown Victoria Police Interceptor jnj7707@yahoo.com |
#10
|
|||
|
|||
Re: Accessing the lighter socket/housing
Quote:
Your choice of CD changers sounds good! How about a pic when you're done with the install? I just ordered a Pioneer DEHP5000UB yesterday after receiving a non-working Sti changer from an NASIOC scammer . Glenn
__________________
"The only thing necessary for the triumph of evil is for good men to do nothing" Aaron Burke 1993 25th Anniversary Edition #63 of 301. R.I.P. Rojo 7/24/2008 She saved my life! 1997 Ebony Mica Pearl LSI. BLACKBERRY 1998 5-Spd Legacy GT Wagon in Glacier White: NUBURU 2005 Cadillac STS in Sandstorm Metallic: STORMY Veteran and farthest traveler of 1st SoCal2MuseumsMeet2010. http://www.subaru-svx.net/photos/user.php?RojoRocket |
#11
|
||||
|
||||
Re: Accessing the lighter socket/housing
Hey Glenn thanks for the heads up on the console, that's just the info I was looking for. It helps to have an idea of what to look for from someone that has been there before.
I'll post a pic of it when it's installed Tough luck on the non-working Sti changer - hope you didn't lose too much on it
__________________
Jerry 2005 Baja Turbo 2008 Ford Crown Victoria Police Interceptor jnj7707@yahoo.com |
#12
|
||||
|
||||
Re: Accessing the lighter socket/housing
Gee has it been 6 months since the last post here?
WOOHOO I finally bit the bullet and finished the stereo install. Legacy/Outback stereo 6-disk changer. What a nice unit, and again it looks like it was designed for it. BUT dang what a tight fit! No modifications necessary for the door, the knob clears. One thing on my install that divurged from svxdc's EXCELLENT INSTRUCTIONS was the need for the 24" antenna cable extension. After installing with the extension, no radio reception (must have been a bad cable). Anyway, while sitting in the car staring at it for awhile, it dawned on me that the original antenna cable would work with inches to spare. So not sure on the rationale although no doubt there is in some cases. The unit works perfectly with the power antenna, lowering it when playing CDs and raising for radio. I'm always amazed when something works! As for the cigarette lighter socket replacement, and related console disassembly, that's going to have to wait for next time. I can't leave this without putting in a plug for svxdc's wiring harnesses. They make this install possible for someone of my limited electrical knowledge. The same goes for his install write-up. Priceless.
__________________
Jerry 2005 Baja Turbo 2008 Ford Crown Victoria Police Interceptor jnj7707@yahoo.com |
|
|