SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
How to remove switches that control door/room light
The back light on my overhead switches are burned out. Do these just pry out?
|
#2
|
||||
|
||||
going by memory here, but i think you (carefully so you don't scratch them) pop out the map light covers with a flat head screwdriver, and there are bolts under there. remove the bolts, and undo the connectors.
__________________
Alan 1987 928 S4 (Black) SOLD! 1997 SVX LSi (Ebony) SOLD! 2005 Legacy GT (Silver) [Cobb Stg 2+] SOLD! 1987 928 S4 (Black) SOLD! 2005 Forester XT Premium (Crystal Gray Metallic) SOLD! 2008 Lancer Evolution X MR (Apex Silver) [Cobb Stg 1+] 2015 Outlander Sport 2.4GT AWD (Mercury Gray) 2013 G37xS (Obsidian Black) |
#3
|
||||
|
||||
1. Pull out the covers that cover the map Lights.
2. Use a Phillips head screwdriver to undo the entire unit. 3. Unplug the two plugs holding the unit up. 4. Undo the 4 phillips head screws holding on the black piece of metal. 5. Pull off the piece. 6. Have 2 no. 272-1092 bulbs from radioshack to replace the bulbs. 7. Put back together in reverse order.
__________________
-Jason (8/23/07-Present) 1995 Subaru SVX LSi (197k) Polo Green (#1102) 03/95 Mods: DDM Tuning 4500k 35w Low Beam HID, 100w H3 Bulbs, Extra Ground Cables, 15 minute $12.96 mod, svxfiles designed transmission mount (), sporting a "new" tail light bar, silver BBS rims, custom power steering cooler (one that doesn't dump ATF constantly), new negative lead cable, no more third or fourth gear (1977-Present) 1977 Chevrolet Corvette (81k) Silver (12/01/2011-Present) 2005 Subaru Outback 2.5i Limited 5MT (97k) I have a bad feeling about this. -Obi Wan Kenobi |
|
|