SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#16
|
||||
|
||||
1000.- for a SS mandrel bent full exhaust is a VERY reasonable price. $500 would result in a zero profit.
__________________
Former: 1994 Barcelona Red(x2), 1995 Brilliant Red, 1992 Liquid Silver, 1992 Ebony(x2), 1992 Pearl White (x2) Current: 2017 Ford Raptor 2017 Kawasaki KLR 1995 Guards Red Carrera 1995 Spec-ish Miata - track car 1957 CJ-5 |
#17
|
||||
|
||||
profit? $500 for a complete system inclduing all mufflers/cats would result in my buying half of his exhaust system for him just cause I'm a nice guy....I'm not that nice. lol
There are just a lot of parts to this system. It was designed with no sacrifices made for the sake of cost. Quote:
__________________
Michael Emery, MBA, MS 94 SVX LSI, Ebony Pearl profile 94 SVX LSI, Ebony Pearl from back Performance and Multi-Fuel Tuning Last edited by longassname; 02-27-2007 at 11:52 AM. |
#18
|
||||
|
||||
I must have missed the part where he said they are stainless steel. I'll be keeping an eye on this
__________________
Brian |
#19
|
||||
|
||||
not to repeat myself, but is this designed for the S/C?
__________________
Former: 1994 Barcelona Red(x2), 1995 Brilliant Red, 1992 Liquid Silver, 1992 Ebony(x2), 1992 Pearl White (x2) Current: 2017 Ford Raptor 2017 Kawasaki KLR 1995 Guards Red Carrera 1995 Spec-ish Miata - track car 1957 CJ-5 |
#20
|
||||
|
||||
Yes it is.
Quote:
|
#21
|
||||
|
||||
Will it be available in normal steel as well as SS?
Always good to see new SVX stuff out there.
__________________
'93 Anniversary Edition SVX 122k - 3.7 FD 5MT Swap, ECUtune 1a1, Bontrager RSB, Mad Restoration underway! '20 Honda Ridgeline Custom Oil Caps, Battery Bars, Phenolic Spacers for sale here: http://www.x35design.com |
#22
|
||||
|
||||
No, I don't think so; they charge so much for the bending I doubt it will be worth it to get not stainless.
I will try to make a cheaper system though which will have the same tubes front of the crossover muffler, have a dual in single out muffler instead of the crossover, and then a single pipe back to the factory muffler. That aught to put an all stainless, non rattling, non buzzing, high performing, quiet exhaust within the means of most SVX'ers. The dual exhaust I have planned out is really intended for the few who don't have to make sacrifices. Quote:
|
#23
|
||||
|
||||
Annoyingly enough the single system will not be able to use the same pipes forward of the center muffler because the center spacing on the inlets is different. So no economies of scale can be shared between the two systems
|
#24
|
||||
|
||||
Put me on that list of being interested in this dual exhaust set-up. Let me know as I am currently looking for an upgraded exhaust system for my SVX and will be ready to purchase whenever it is that I am able to locate a good system.
|
#25
|
||||
|
||||
If I can get the complete package together for under $1k how many people would want it right away?
Please be real. I don't want to go shell out for a bunch more systems than people are actually ready to buy. If I can't recoup my cash from getting the batch made it will hurt other projects so only speak up if you actually intend to buy and will be able to buy 2 weeks from now. Quote:
|
#26
|
||||
|
||||
I gotta sit out for now, but when ever the *new* S/C project is done I will be interested
__________________
Former: 1994 Barcelona Red(x2), 1995 Brilliant Red, 1992 Liquid Silver, 1992 Ebony(x2), 1992 Pearl White (x2) Current: 2017 Ford Raptor 2017 Kawasaki KLR 1995 Guards Red Carrera 1995 Spec-ish Miata - track car 1957 CJ-5 |
#27
|
||||
|
||||
Keep me updated on the final price as I am very interested. Plus I'll be in Massachusettes for the months of April and May working so I can come and pick it up. Let me know. Thanks.
|
#28
|
||||
|
||||
I'm in Florida and for now I'm specifically asking only about who would want to buy in two weeks. The way this will work is I'll take my car and all the parts into the shop with the cnc mandrel bender and have them make the exhaust for my car. They will have to do a die change to do that. I'll have them make a batch of the mandrel bent tubing necessary to put together however many systems people want while they have the right dies on the mandrel bender.
If I can put together a good size batch I may be able to get them to make extra sets and hold them in their stock so we can order as we need without the expense of a die change for each set. The tubing has to be done in batches or it will be too expensive and I'm not going to hold a bunch in stock. Quote:
|
#29
|
||||
|
||||
Quote:
__________________
Former: 1994 Barcelona Red(x2), 1995 Brilliant Red, 1992 Liquid Silver, 1992 Ebony(x2), 1992 Pearl White (x2) Current: 2017 Ford Raptor 2017 Kawasaki KLR 1995 Guards Red Carrera 1995 Spec-ish Miata - track car 1957 CJ-5 |
#30
|
||||
|
||||
So are we at myself + 1 for purchasing in around a week or myself +0?
Quote:
|
|
|