SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
hitch diagram
were the plans for the hitch ever loaded into the how to docs? i can find em.
__________________
Tranny goes in, tranny comes out, tranny goes in.....AW ****, tranny comes out.... |
#2
|
||||
|
||||
Re: hitch diagram
There are some pictures in the old lockers of Tuzem and Connsvx
There were sketches in somebody's locker, but I can't recall now. I may have saved them. If I find them I'll link it.
__________________
'93 Anniversary Edition SVX 122k - 3.7 FD 5MT Swap, ECUtune 1a1, Bontrager RSB, Mad Restoration underway! '20 Honda Ridgeline Custom Oil Caps, Battery Bars, Phenolic Spacers for sale here: http://www.x35design.com |
#3
|
||||
|
||||
Re: hitch diagram
Hitch is very simple. Basically it is a square bar connected between the rear tow rings, and a flat plate aprox 4"wide 1/8 thick bent to go under the gas tank and connect to the rear of the swing arm. I made a moc up out of cardboard and then tran to steel.
I will see if I can locate info. Good shot of the pate connected to the rear of the swing arm plate Parts laid out on the floor. Tricky part is the plate that attaches to the rear end seen front facing Here is same picture. You can see the attaching plate welded to it Hope it helps. I have towed 2,000 lb with it
__________________
When I was in school I sucked in sports. Then I found out I can buy trophies and now I am great at everything. Last edited by Conn SVX; 01-15-2015 at 05:42 AM. |
Thread Tools | |
Display Modes | |
|
|