SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Lower control arm bushings worn?
I have a clunking noise when going over bumps and around corners that I think are caused by the lower control arm bushings which appear to be worn. Using a pry bar I can see that the bushings are cracked around their circumference. I have replaced the ball joints which were worn; this helped with the problem somewhat.
Is this a typical problem with the control arm bushings? Does anyone have any used control arms for sale that are in good shape? Is there a group buy available yet on the control arm bushings? Thanks, in advance. Ken |
#2
|
|||
|
|||
Is the control arm bushings a common problem???
I have not got a reply on this yet.
Please someone reply. |
#3
|
||||
|
||||
there was a group buy on control arm bushings..
you would have to go to the group buy forum or pm earthworm to see if there is any avaliable.
__________________
1992 Subaru SVX LS~L Ebony Pearl 1992 Dodge Stealth R/T Firestorm Red 1992 Subaru SVX LS~L Pearl White 1992 Subaru SVX LS~L Ebony Pearl JDM 6MT/DCCD 2007 Subaru Legacy Spec B. Diamond Grey Metallic |
#4
|
||||
|
||||
Once there is enough demand there will be a group buy for these bushings. Check the group buy forum and add your name to the list if you are still interested.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#5
|
||||
|
||||
thumps over bumps could mean sway bar links are worn grab them shake them and see if there is any looseness in the parts
__________________
- John ASE certified Master Tech W/ X1 Twin City Fleet repair, St. Paul, MN need work done? Have tools will travel
|
Thread Tools | |
Display Modes | |
|
|