SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Rear axles to diff.?
I have a bad rear axle and want to change it out. In looking at it, I don't see a roll pin holding the inside end to the differential. Is there one? The fronts have roll pins that I had to drive out to change the axle but the connection on the rear isn't obvious to me.
Thanks for any advice. John Sullivan '92 svx |
#2
|
||||
|
||||
It's held in with a circle clip as shown here.http://www.subaruparts.com/diag/?mod...category=281-A
You will need a new one of those number14's maybe 12 too. |
#3
|
||||
|
||||
Just give it a tug and it will pop out. I was surprised how easy it was.
__________________
92 Ebony - Level 10/n2o REAR-ENDED 92 Teal - painted yellow/4.11 5spd/n2o SOLD 92 Claret - 4.44 SOLD 94 Barcelona - FWD SOLD 92 Ebony - 3.90 SOLD 94 Laguna ROLLING w/4.44s/Ecutune ECU +TCU/STI springs/Infiniti M45 rims |
Thread Tools | |
Display Modes | |
|
|