SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Replacing the rear wheel bearing...Help needed
I am attempting to change the rear wheel bearing on the passengers side of the car (92) and it is a nightmare, I have gotten all of the suspension arms off except on but that is no big deal, but what my main problem is I can't get the ABS sensor off of the hub. I took the little bolt off but the sensor will not budge, I also can not get the parking brake cable disconnected from the hub/brake shield assembly also. I took the little clip off but it still will not budge Any ideas.....what am I doing wrong here? I have a crappy chiltons manual that tells me that they are both supposed to come off (it does not say how) but I can not get them at all! I need to get them off so I can take the whole hub/bearing assembly out and get the bearing/spindle pressed out. Any other tips that I should be careful of when I am redoing the bearing, I got some fully synthetic grease to repack the new one with. Thanks for all of the help in advance...It has been quite an experience tearing into the suspension for the first time....Tim
|
|
|