SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Windshield rubber?
I was just out running my SVX and noticed the rubber trim that runs around the windshield is all wrinkly up the sides right where it suppost to lay flat on the glass, and it wasn't like this a week ago? Anyone else have this problem? Is it easy to get a new one installed or does it get glued in with the windshield?
What do I do it looks like crap.
__________________
92 SVX #772 140k 6speed, ECU Tune stage II, Koni/Ground control, 3,270lbs. 91 Legacy Turbo 5spd. FMIC, crappy stock turbo, ACT clutch. 78 BRAT (New toy) (Soon to be EJ22T powered) 90 240 SX. RB25 powered!! DRIFT!!!111!!! (GF's car) To many cars to spend time on teh web! |
#2
|
|||
|
|||
paint it orange or take it from the dumba$$ who has one parked at your garage. He'll never notice.
|
#3
|
|||
|
|||
Re: Windshield rubber?
Quote:
One thing that I've tried is to get very thin plastic, like the immitation "credit card" material in junk mail, and cut a "J" hook into it and the push it in between there and dig out the crap. The card will go down in an inch or more, but it slides in easily. It does help with the wrinkling.
__________________
cbx-man '92 LSL Liquid Silver / Automatic Level-10 valve body mod / remote filter '92 LSL Pearl White / 5 spd. IndigoSpeed 11# flywheel / ACPT Carbon fiber drive shaft '80 Honda CBX in-line 24 valve 6 cylinder |
#4
|
||||
|
||||
Thats all good but what do you do when it's already F'd up.
I could practice changing it on Proj.007 Found the piece on Suby parts It like $27. and called the Damn rubber thing, or somthing like that. I just want to know if anyone has changed this before?
__________________
92 SVX #772 140k 6speed, ECU Tune stage II, Koni/Ground control, 3,270lbs. 91 Legacy Turbo 5spd. FMIC, crappy stock turbo, ACT clutch. 78 BRAT (New toy) (Soon to be EJ22T powered) 90 240 SX. RB25 powered!! DRIFT!!!111!!! (GF's car) To many cars to spend time on teh web! |
#5
|
|||
|
|||
Laughing my ****ing ass off the damn rubber thing! That is good secret man. Seriously tho you can change that out with a mid range heat gun the old part should lift off without having to move the windsheild just be careful not to move the windsheild so it stays centered. Then the next rubber frame should come with peel off and adhezive on it to stick over and then let it dry a while before you drive it ok?
|
|
|