The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > General SVX Babble

Reply
 
Thread Tools Display Modes
  #1  
Old 02-28-2005, 07:05 PM
immortal_suby's Avatar
immortal_suby immortal_suby is offline
Thread Killah
Alcyone Gold Contributor
 
Join Date: Feb 2001
Location: Greenville, SC
Posts: 5,835
Registered SVX
did something stupid while cleanign throttle body

Did a brake band adjustment last week and while I had the intake boot off I decided to spray out the throttle body with some cleaner.

As I was spraying inside the passenger side butterfly I watched in horror as the red tube connected to the spray bottle popped off and dropped into the intake.

Felt very stupid for a few minutes, imagining the next 3 hours spent removing the entire intake to get it out.

Luckily, I was able to remove only the throttle body and using a long needle nose pliers grab the tube out of there. Just another quick job that was made much longer by one simple careless move.
__________________
Matt
Locker Link
2015 BRZ Limited 6MT
92 Ebony LS-L ECUtune Stage2av1, Z32 MAF, 370cc injectors, TomsSVX intake, BontragerWorks 22mm RSB #003, HID Hi and Lo beams, OT endlink and bushing mods, PWR Aluminum radiator, Harvey's QC shift kit, 2.5" flowmaster 80 exhaust, 17" Michelin Pilot Sport A/S, Poly sway bar bushings, Slotted Bradi rotors, AFBeefcake powdercoated calipers, 97 grill, and a huge set of air horns. 300,000 miles and counting
92 Ebony LS-L. ecutune stage1v4, motorsport 1pc pulley. Garage Queen - sold to Dad in upstate NY 155,000 miles
19 Subaru Ascent Premium - -Hers !.
89 DL 4x4 little red wagon - a.k.a. The immortal suby. 275k R.I.P.
Reply With Quote
  #2  
Old 02-28-2005, 07:12 PM
Landshark's Avatar
Landshark Landshark is offline
Hater
 
Join Date: Mar 2002
Location: The Burgh
Posts: 10,807
Re: did something stupid while cleanign throttle body

Quote:
Originally posted by immortal_suby
Did a brake band adjustment last week and while I had the intake boot off I decided to spray out the throttle body with some cleaner.

As I was spraying inside the passenger side butterfly I watched in horror as the red tube connected to the spray bottle popped off and dropped into the intake.

Felt very stupid for a few minutes, imagining the next 3 hours spent removing the entire intake to get it out.

Luckily, I was able to remove only the throttle body and using a long needle nose pliers grab the tube out of there. Just another quick job that was made much longer by one simple careless move.
that happened to me, too, but luckily the little tube didn't get too far. my heart did stop for a brief moment as i watched it shoot off into what i thought was the deep recesses of the engine!!!
__________________
Alan

1987 928 S4 (Black) SOLD!
1997 SVX LSi (Ebony) SOLD!
2005 Legacy GT (Silver) [Cobb Stg 2+] SOLD!
1987 928 S4 (Black) SOLD!
2005 Forester XT Premium (Crystal Gray Metallic) SOLD!
2008 Lancer Evolution X MR (Apex Silver) [Cobb Stg 1+]
2015 Outlander Sport 2.4GT AWD (Mercury Gray)
2013 G37xS (Obsidian Black)
Reply With Quote
  #3  
Old 02-28-2005, 07:31 PM
michael's Avatar
michael michael is offline
What Potholes ???
Subaru Bronze Contributor
 
Join Date: Sep 2002
Location: Scranton, PA
Posts: 2,425
Registered SVX
I cleaned out the throttle body on my 924 then re-assembled everything and went for a ride. After an hour or so the throttle became stuck wide open! I turned the key off and it would not stop, pulled the battery terminal, still screaming. Finally I grabbed the main coil wire and got a nice jolt but it stopped. I pulled the throttle body off and found half of a rather large towel that I used to clean out the intake tube.
__________________
"The things you own end up owning you. It's only after you lose everything that you're free to do anything."

92 Pearl White Ls-l (138k) Euro Headlights & Blinkers, 97 Grill, Euro Tail Lights, SS Brake Lines, Stebro Exhaust, Slotted Rotors, Classic Registration
96 Legacy Outback (206k) 5-speed 2.2 Lightweight Crank Pulley, Group N Trans & Motor Mounts SOLD
Wanted: Steering Wheel
Reply With Quote
  #4  
Old 02-28-2005, 08:22 PM
Noir's Avatar
Noir Noir is offline
Ever Vigilant He Never Sleeps.
 
Join Date: Dec 2002
Location: Mullet Country
Posts: 5,021
Re: did something stupid while cleanign throttle body

Quote:
Originally posted by immortal_suby
Did a brake band adjustment last week and while I had the intake boot off I decided to spray out the throttle body with some cleaner.

As I was spraying inside the passenger side butterfly I watched in horror as the red tube connected to the spray bottle popped off and dropped into the intake.

Felt very stupid for a few minutes, imagining the next 3 hours spent removing the entire intake to get it out.

Luckily, I was able to remove only the throttle body and using a long needle nose pliers grab the tube out of there. Just another quick job that was made much longer by one simple careless move.
and i thought i had a bad time in greenville last week.
Reply With Quote
  #5  
Old 02-28-2005, 11:13 PM
ensteele's Avatar
ensteele ensteele is offline
Betcha can't buy just one!
Alcyone Gold Contributor
 
Join Date: Jan 2002
Location: Burlington, WA
Posts: 19,552
Send a message via ICQ to ensteele Send a message via Yahoo to ensteele Send a message via Skype™ to ensteele
Registered SVX Classic SVX
Why do we all have to learn the hard way?
__________________
.
Earl .... ... .... ><SVX(*>

Subaru Ambassador

[COLOR=”silver”]1992 Tri Color L[/COLOR] ~45K (06/91) #2430
1992 Dark Teal LS-L ~184K (05/91) #0739
1992 Claret LS-L ~196K (05/91) #0831
1992 Pearl LS-L ~103K (06/91) #1680
1992 Pearl LS-L ~151K (06/91) #2229
1992 Dark Teal LS ~150K (07/91) #3098 (parts car)
1992 White LS-L ~139K (08/92) #6913
1993 25th AE ~98K (02/93) #164
1993 25th AE ~58K (02/93) #176
1993 25th AE ~107K (02/93) #215
1993 25th AE ~162K (02/93) #223
1994 Laguna Blue Pearl LSi ~124K (1/94) #2408
1994 Laguna Blue Pearl LSi ~144K (10/93) #1484
1994 Laguna Blue Pearl LSi ~68K (10/93) #1525
1994 Barcelona Red LSi ~46K (02/94) #2624
1994 Pearl LSi ~41K (12/93) #1961
1995 Bordeaux Pearl LSi ~70K (02/95) #855
1996 Polo Green LSi ~95K (03/96) #872
1997 Bordeaux Pearl LSi ~55K (08/96) #097
2003 Brilliant Red LS1 Convertible ~29K (04/03) #8951
1999 Magnetic Red LS1 Coupe ~33K (04/99) #6420

My Email | Old Locker | New Locker | Picture of 15 of the 19
Reply With Quote
  #6  
Old 02-28-2005, 11:23 PM
SilverSpear's Avatar
SilverSpear SilverSpear is offline
Still 1.7K to go...
Subaru Silver Contributor
 
Join Date: Oct 2004
Location: Lebanon, Middle East
Posts: 7,563
Send a message via AIM to SilverSpear Send a message via MSN to SilverSpear Send a message via Skype™ to SilverSpear
Registered SVX
Get some Thinner and clean everything up and start all over...
By the way, when you remove the throttle body, do you damage the intake gaskets? i mean do they have to be replaced afterwards?
__________________
Danny

1994 Silver SVX in hybernation, awaiting for the monsterous awakening (Lebanon)
1967 Mercedes-Benz 250SL Euro Specs, Hard/Softtop, White/Red. Under Complete Restoration
2013 Mercedes-Benz SL350 Euro Specs, White/Red. Mint... Another step into SL Collection.
Reply With Quote
  #7  
Old 03-01-2005, 08:31 AM
svxfiles's Avatar
svxfiles svxfiles is offline
There's a storm coming.
 
Join Date: Dec 2001
Location: Wiley Ford WV
Posts: 8,650
Significant Technical Input Registered SVX
Back in 1973 when I was taking auto shop as a junior, a classmate of mine had a senior disconnect the linkage to the secondary throttle plates on the four barrel carburator on the 430 cid V8 he installed in his old Jeep.
He wanted to save some gas.
Two minutes later, his throttle stuck wide open and he crashed into a concrete piliar about 2.5 feet wide, and 3.5 feet tall destroying his front end.



Gas at the time was about $0.35 a gallon.
__________________
www.svxfiles.com
The first SuperCharged SVX,
the first 4.44 gears,
the first equal length headers,
the first phenolic spacers,
the first Class Glass fiberglass hood,
the first with 4, 4.44s in his driveway


Fiberglass Hood thread
My locker
4.44 Swap link
Reply With Quote
  #8  
Old 03-01-2005, 02:04 PM
Earthworm's Avatar
Earthworm Earthworm is offline
Meow!
 
Join Date: Mar 2002
Location: Winnipeg, Manitoba
Posts: 11,957
Send a message via ICQ to Earthworm Send a message via AIM to Earthworm Send a message via MSN to Earthworm Send a message via Yahoo to Earthworm Send a message via Skype™ to Earthworm
Quote:
Originally posted by ensteele
Why do we all have to learn the hard way?
Because we would never learn at all then
Reply With Quote
  #9  
Old 03-01-2005, 02:04 PM
Earthworm's Avatar
Earthworm Earthworm is offline
Meow!
 
Join Date: Mar 2002
Location: Winnipeg, Manitoba
Posts: 11,957
Send a message via ICQ to Earthworm Send a message via AIM to Earthworm Send a message via MSN to Earthworm Send a message via Yahoo to Earthworm Send a message via Skype™ to Earthworm
Quote:
Originally posted by SilverSpear
By the way, when you remove the throttle body, do you damage the intake gaskets? i mean do they have to be replaced afterwards?
I didn't have to replace mine. You just need to be careful.
Reply With Quote
  #10  
Old 03-02-2005, 01:19 PM
svx_commuter's Avatar
svx_commuter svx_commuter is offline
Making tires round, Six now :)
 
Join Date: Feb 2001
Location: North Jersey
Posts: 3,433
I was never real happy with pointing that red tube into the intake as I have seen it b l a s t off. I've been using rubber gloves to protect my hands and spraying the cleaner on a paper towel and then wipeing out the TB. It works okay for me.
__________________
May your transmission live forever.
SuperbVehicleXtraordinary
Proud sponsor of a 1992 SVX.
Reply With Quote
  #11  
Old 03-02-2005, 04:53 PM
immortal_suby's Avatar
immortal_suby immortal_suby is offline
Thread Killah
Alcyone Gold Contributor
 
Join Date: Feb 2001
Location: Greenville, SC
Posts: 5,835
Registered SVX
Sounds like a good idea. Maybe next time I will duct tape the red tube in place

It did give me a good chance to clean up the back of the throttle plates real well.
__________________
Matt
Locker Link
2015 BRZ Limited 6MT
92 Ebony LS-L ECUtune Stage2av1, Z32 MAF, 370cc injectors, TomsSVX intake, BontragerWorks 22mm RSB #003, HID Hi and Lo beams, OT endlink and bushing mods, PWR Aluminum radiator, Harvey's QC shift kit, 2.5" flowmaster 80 exhaust, 17" Michelin Pilot Sport A/S, Poly sway bar bushings, Slotted Bradi rotors, AFBeefcake powdercoated calipers, 97 grill, and a huge set of air horns. 300,000 miles and counting
92 Ebony LS-L. ecutune stage1v4, motorsport 1pc pulley. Garage Queen - sold to Dad in upstate NY 155,000 miles
19 Subaru Ascent Premium - -Hers !.
89 DL 4x4 little red wagon - a.k.a. The immortal suby. 275k R.I.P.
Reply With Quote
  #12  
Old 03-03-2005, 07:30 AM
SilverSpear's Avatar
SilverSpear SilverSpear is offline
Still 1.7K to go...
Subaru Silver Contributor
 
Join Date: Oct 2004
Location: Lebanon, Middle East
Posts: 7,563
Send a message via AIM to SilverSpear Send a message via MSN to SilverSpear Send a message via Skype™ to SilverSpear
Registered SVX
Quote:
Originally posted by Earthworm
I didn't have to replace mine. You just need to be careful.
you know earthworm, any variation with an air leak will cause a sputtering engine... i just wanted to know if the gasket has a silicone sealant stuck to it. I can imagine the gaskets made out of paper material, glued by silicone, and when removing the manifold, will cause them to be torned. isn't it?
__________________
Danny

1994 Silver SVX in hybernation, awaiting for the monsterous awakening (Lebanon)
1967 Mercedes-Benz 250SL Euro Specs, Hard/Softtop, White/Red. Under Complete Restoration
2013 Mercedes-Benz SL350 Euro Specs, White/Red. Mint... Another step into SL Collection.
Reply With Quote
  #13  
Old 03-03-2005, 08:05 AM
GreenMarine's Avatar
GreenMarine GreenMarine is offline
From POST-***** to LURKER
 
Join Date: Dec 2002
Location: Raleigh, NC
Posts: 5,873
Damn Matt, I can see how that would really suck... Glad that you were able to quickly resolve the problem
__________________
2020 Subaru Outback Touring - Wife's first Subaru
2005 Volvo V70R - 5-cylinder love! :Heart:

** SOLD **1998 Subaru Legacy 2.5GT Wagon - MOST RELIABLE car I've ever owned
** SOLD **2006Subaru WRXSTi (Former "Boxer4Racing.com / Continential Tire" STi) - Built EJ22t block / EJ207 JDM STi "big port heads" - 9,000rpm MONEY PIT!!!
** SOLD ** 1995 "Tree-Hugger Green" SVX L AWD(5 MT) --- "Gumby" 130K miles #399 in MY95, my original love...
Reply With Quote
  #14  
Old 03-03-2005, 02:14 PM
Earthworm's Avatar
Earthworm Earthworm is offline
Meow!
 
Join Date: Mar 2002
Location: Winnipeg, Manitoba
Posts: 11,957
Send a message via ICQ to Earthworm Send a message via AIM to Earthworm Send a message via MSN to Earthworm Send a message via Yahoo to Earthworm Send a message via Skype™ to Earthworm
Quote:
Originally posted by SilverSpear
I can imagine the gaskets made out of paper material, glued by silicone, and when removing the manifold, will cause them to be torned. isn't it?
Mine wasn't glued.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122