Some pictures of my lovely SVX!

Gloomy · #1 07-01-2006, 03:36 PM

Hello guys!

I'm new here and I want to share with you my passion for the SVX! My name is Alex, I'm from canada and there's some pictures of my 1994 Lsi SVX.

And this after installing my HID. (look at the white theet of my friend!) HAHAHAHA!

Thank you for looking!

Alex

DanSVX94 · #2 07-01-2006, 03:39 PM

niiiiiice -- what kind of rims are those?

Gloomy · #3 07-01-2006, 03:39 PM

Those are Advan RG

Pure_Insanity8 · #4 07-01-2006, 04:25 PM

Looks nice, Alex! Must be pretty low mileage to look that good under the hood... or you have A LOT of time on your hands to clean it that well.

What did you do as far as your HIDs? Premade kit or pieced together from Audis, BMWs, and Infinitis, like a couple guys on here have done?

BTW, what is that roadsign in the third picture confused about?

Gloomy · #5 07-01-2006, 04:44 PM

Hi Pure_Insanity8, the HID I'm using is a 10 000k premade kit

My SVX have 160 000km...so it's around 100 000miles. Yes the car is in good condition but it has been stored without moving since year 2000!! So the paint have some little imperfections

The roadsign in you see in the third picture explain that there's a touristic information center ahead! Canada's road signs are really different from yours?

immortal_suby · #6 07-01-2006, 05:00 PM

sweet looking ebony
what is that blue box next to your abs unit - is that the HID ballast?

immortal_suby · #7 07-02-2006, 09:17 AM

Still looks like an ebony to me in this picture.

Gloomy · #8 07-02-2006, 09:33 AM

Quote:

Originally Posted by immortal_suby

Still looks like an ebony to me in this picture.

The picture gives that effect, it's teal.

Subafreak · #9 07-02-2006, 10:41 AM

Nice car...cool pics. Bronses always look good on green. Those wheels are really pushing out thoe...How much space do you have from the strut on the back side? What are you doing with the suspension to make them work?

Gloomy · #10 07-02-2006, 11:21 AM

Quote:

Originally Posted by Subafreak

Nice car...cool pics. Bronses always look good on green. Those wheels are really pushing out thoe...How much space do you have from the strut on the back side? What are you doing with the suspension to make them work?

Thanks alot it's really appreciated!

I dont know the space between my strut and the wheels...And I dont run the wheels by now so I can't mesure that for you sorry...

I need to change my suspension because the wheel offset make the tire go flush with the fender edge...So each time I put the foot on the gas, the tire rub the fender. I need a stiffer spring like my ground control/koni setup) Also, I need to put a little bit of camber in front to make the wheels fit inside the fender.

By the way, you're running this suspension setup (koni GC)? How is it? Is that normal that I can't ajust the rear shock dampning?

Thanks alot!

Alex

Subafreak · #11 07-02-2006, 01:39 PM

Yeah it's the Koni/CG set up and all the Konis are set to full stiff. You have to take the rear struts off and compress them all the way down then turn them to adjust. Mine came preset so ive never acctually done it but that is how they work...kinda weird huh?