Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
|
SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#16
01-23-2019, 05:22 PM
|
|||
|
|||
|
Re: OEM amplifier question
Also the original “mash the throttle Power Mode” still works too.
__________________
One Arm Bloke. Tell it like it is! 95 Lsi. Bordeaux Pearl, Aust. RHD.149,000Kls Subaru BBS wheels. 97 Liberty GX Auto sedan. 320,000Kls. 04 Liberty 30R Auto Premium. 92.000kls. 
|
|
#17
01-23-2019, 09:06 PM
|
||||
|
||||
|
Re: OEM amplifier question
Pin drilling the solder out is fine on single and double-sided pcbs - but be aware that with 4 layers or more drilling can tear at the internal layer pads and cause them to be isolated from the circuit - damaging the holes internal plating......being a PCB designer for past 35 years I have been asked to try and repair damage done by drilling with only about 10% being corrected.
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
|
|
#18
01-27-2019, 12:29 PM
|
||||
|
||||
|
Re: OEM amplifier question
Harvey,
I have installed the power mod ROM that you sent me many years ago, I have also wired it up to the JDM "POWER" switch next to gear selector - all working good. A friend of mine is looking for the EUR switch that normally goes into the same location - by gear selector, saying "ECON" - do you know of anyone selling this switch?. TIA
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
|
|
#19
01-27-2019, 03:19 PM
|
|||
|
|||
|
Re: OEM amplifier question
No Steve, I have never seen the switch. Although we have the Economy map in the TCU, there was no switch fitted, to the Australian delivered cars.
It maybe in the UK delivered cars.
__________________
One Arm Bloke. Tell it like it is! 95 Lsi. Bordeaux Pearl, Aust. RHD.149,000Kls Subaru BBS wheels. 97 Liberty GX Auto sedan. 320,000Kls. 04 Liberty 30R Auto Premium. 92.000kls.
|
 |
|
|
Linear Mode
