The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 04-14-2007, 10:20 PM
BullsEye BullsEye is offline
Registered User
 
Join Date: Apr 2007
Location: ON, Canada
Posts: 7
Ignition Module Input/Output

Does anyone know the specifics of the SVX Ign. Module.
Input voltages, output and dwell, volts, mA to fire coils ect.

I'm going with stand alone engine management.

Thanks
Reply With Quote
  #2  
Old 04-17-2007, 03:01 PM
BullsEye BullsEye is offline
Registered User
 
Join Date: Apr 2007
Location: ON, Canada
Posts: 7
Anybody?

Has anybody scoped the input?
Reply With Quote
  #3  
Old 04-30-2007, 06:33 PM
BullsEye BullsEye is offline
Registered User
 
Join Date: Apr 2007
Location: ON, Canada
Posts: 7
I guess I should answer my own question in case someone else is going stand alone and wants to retain the factory module.

I purchashed an oscilliscope and took some readings.

The module recieves a 4.0V - 4.2V signal from the computer.

The dwell @
Idle is 2.4ms
1000RPM is 2.4ms
2000RPM is 2.2ms
3000RPM is 2.0ms
4000RPM is 2.0ms
5000RPM is 2.0ms

Now I have to find out the crank and cam sensors.
Like at what degree is the crank at when the tooth is lined up with the sensor.

Would anyone have that information?

Also the IAC valve is it votage or PWM?
Reply With Quote
  #4  
Old 07-10-2007, 07:57 PM
jsteele22 jsteele22 is offline
Registered User
 
Join Date: Feb 2006
Location: Colorado Springs, CO
Posts: 50
Quote:
Originally Posted by BullsEye

Also the IAC valve is it votage or PWM?
I pulled my IAC off and played with it some. With pin B grounded, 12V on pin A closes the valve completely, 12 V on pin C opens the valve completely, and with no voltage applied, it rests somewhere in between. This "in between" position is adjusted by loosenening the 2 screws on the "electrical" part of the IAC and rotating it.

My guess is that at any given time EITHER pin A or pin C has a 12V PWM signal on it. (PWM means it switches rpaidly between 0 and 12 V, and the ratio of high to low determines the shutter position). Is there anybody out there who knows or can check ?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:57 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122