SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
code 11... Crank Angle Sensor
What is that all about? first got the 11 code right after my "200,000 mile Burgundy looking SVX" got a engine replacment from Japan and that has been 3 months ago... Happened again yesterday. Engine raced up a couple of times and died as Check engine light came on. I immediately checked for the code and got code 11.
Maybe something wasn't replaced from the old engine that should have been done? I think there are some things that are not compatible... Any ideas, anyone? Thanks, Keith |
#2
|
|||
|
|||
Re: code 11... Crank Angle Sensor
Replace it with a new or known good used one.
That is all |
#3
|
||||
|
||||
Re: code 11... Crank Angle Sensor
it is likely the wiring right to the plugs, they are prone to cracking and such
|
#4
|
||||
|
||||
Re: code 11... Crank Angle Sensor
Where might this "Crank Angle Sensor" contraption be found on the car
Thanks, Keith |
#5
|
|||
|
|||
Re: code 11... Crank Angle Sensor
Just below the alternator, mounted directly on the oil pump. It is easy to remove, but you may have to unbolt and lift the alternator out of the way.
__________________
Cam '92 Ls-L Dark Teal 11:1 CR ECUTUNE pistons ECUTUNE .256 duration intake/exhaust cams ECUTUNE STAGE 2AV1 ECU Z32 MAF/SR20DET injectors Balanced & Blueprinted |
#6
|
||||
|
||||
Re: code 11... Crank Angle Sensor
Quote:
Keith |
Thread Tools | |
Display Modes | |
|
|