SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
A/C Evaporator inspection and removal
Hey fellas,
I need to check the evaporator and the expansion valve area for leaks - I'll be looking for the die using a blue light. I'm currently in the middle of removing the lower half of the evaporator tray inside the cab (under the pass dash). The three clips that hold the two halves together were removed as well as all securing nuts. The lower half "wants" to come out and there is a snag. The condensate drain hose was removed as well. -Is it possible to even remove the lower half of the evaporator tray? -Do I need to remove the high and low pressure lines gong through the firewall into the evaporator in order to do this? I wouldn't think so.... Before anyone asks, the compressor, drier, condenser and all O rings have been replaced. But I still have a leak somewhere Thanks for any insight. Ali '92
__________________
If it ain't broken it, doesn't have enough features!!! '92 SVX LSL '03 4Runner '96 FZJ80 Landcruiser '90 Mercedes 300E |
|
|