The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Wanted or For Sale > SVX's and SVX Parts Wanted > SVX Parts Wanted
Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 10-15-2017, 07:06 PM
SURTEESS's Avatar
SURTEESS SURTEESS is offline
Registered User
 
Join Date: Oct 2006
Location: Auckland, New Zealand
Posts: 1,421
WTB Lock/Unlock mating harness

Hi fellow SVXers,

been wanting to add the following switch next to gear selector, but require the mating connector and short length of the OEM wiring loom (about 3-6 inches).

The connector is a 5-way (3-up / 2-down) with clip within the plastic housing.

TIA.

Let me know by PM cost, postage to me in New Zealand.
Attached Images
File Type: jpg central lock 1.jpg (296.0 KB, 210 views)
File Type: jpg central lock 2.jpg (263.1 KB, 203 views)
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
Reply With Quote
  #2  
Old 10-17-2017, 07:22 AM
SURTEESS's Avatar
SURTEESS SURTEESS is offline
Registered User
 
Join Date: Oct 2006
Location: Auckland, New Zealand
Posts: 1,421
Re: WTB Lock/Unlock mating harness

still looking for the mating part....
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
Reply With Quote
  #3  
Old 10-17-2017, 08:18 AM
Svx95's Avatar
Svx95 Svx95 is offline
eg33svx95
 
Join Date: Jun 2011
Location: Yankton, SD
Posts: 243
Registered SVX
Re: WTB Lock/Unlock mating harness

The wiring loom should be there. I see no point in them removing it for certain vehicles. Unless your car is pre-94?

I have the wiring loom, I don't really want to cut it out of my harness but if you really need it and the right amount we can work a deal.

-Sam
__________________
Sam
Brilliant Red 95 SVX L AWD 149K miles - #904/1801, 08 STI 6MT with DCCD & VSS, ACT SB10 HDSS, 6MT bushings, DW200 Fuel pump, 17x7.5 VX-SCYTHE Wheels, 17x8 BBS STI Wheels,PERRIN CRANK PULLEY, 911 Turbo oil filter,$15/15min MOD & $20/20min Mod, Brontrager WORKS 22mm RSB w/ QS component endlinks, SS Brake Lines, DDM TUNING 6000K HID LOWS, Hella Optilux Extreme Yellow Fog Lights,Window scratcher fix, JDM Clear Corners

My Locker
Reply With Quote
  #4  
Old 10-17-2017, 10:17 PM
SURTEESS's Avatar
SURTEESS SURTEESS is offline
Registered User
 
Join Date: Oct 2006
Location: Auckland, New Zealand
Posts: 1,421
Re: WTB Lock/Unlock mating harness

The option was not available here in New Zealand, hence I would like to make it happen. Maybe the same connector is used on other Subaru's of same period also for central locking?.
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.

Last edited by SURTEESS; 10-18-2017 at 02:50 AM.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122