The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:
SVXBot

Go Back   The Subaru SVX World Network > Regional SVX Forum & Clubs > Down Under

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 09-22-2019, 02:07 AM
SURTEESS's Avatar
SURTEESS SURTEESS is offline
Registered User
 
Join Date: Oct 2006
Location: Auckland, New Zealand
Posts: 1,396
CEL error 45 update.

For a few months now I have had a CE light come on, I decoded it as error 45 (atmospheric sensor fault) - replace ECU.

I opened up the ECU only to find no atmospheric sensor board in the ECU (unlike the USA versions).

So figured that the fault lay elsewhere - the B67 pin 9 connection in the ECU was not connected to the wiring harness (this is where the atmospheric sensor lead goes out somewhere).

So thinking to myself the only sensor that senses atmosphere is the MAF....so bought one from www.jauce.com for NZ$50

Fitted it today - now no more CE light !!!!!👌

Now I want to split open the original MAF and look around to see if there is a broken connection, is there a "how to" doc on opening up an SVX MAF somewhere.
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
Reply With Quote
  #2  
Old 09-23-2019, 06:21 AM
theflystyle's Avatar
theflystyle theflystyle is offline
Registered User
Subaru Bronze Contributor
 
Join Date: Jul 2008
Location: Fulton, MD
Posts: 706
Registered SVX
Re: CEL error 45 update.

Is this the guide you are referring to?

http://www.subaru-svx.net/forum/showthread.php?t=53957
__________________
1994 SVX LSi
JDM Tailbar and Grill, Clear Corners, 15min-mod, Nevin Blue RSB, G-FORCE SPORT COMP-2 Tires, Phenolic Spacers (Manifold & Throttle Body), SS Brake Lines, Maniac Electric Motors 160A Alternator
1994 Legacy L
WRX Wheels
2008 Legacy 3.0R
HID, Bilstein F/R, WhiteLine LCA Bushings, Potenza RE970AS PolePosition Tires

Last edited by theflystyle; 09-23-2019 at 10:24 AM.
Reply With Quote
  #3  
Old 09-25-2019, 06:19 PM
SURTEESS's Avatar
SURTEESS SURTEESS is offline
Registered User
 
Join Date: Oct 2006
Location: Auckland, New Zealand
Posts: 1,396
Re: CEL error 45 update.

Yes that is it - thanks.
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
Reply With Quote
  #4  
Old 09-27-2019, 05:53 AM
SURTEESS's Avatar
SURTEESS SURTEESS is offline
Registered User
 
Join Date: Oct 2006
Location: Auckland, New Zealand
Posts: 1,396
Re: CEL error 45 update.

Been running for over a week now and still no CEL - one happy owner again.
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
2001-2015 SVX World Network
(208)-906-1122