Keyless entry and alarm failed

[svxyz92]

After having my timing belt and starter replaced, my keyless entry and alarm don't work. The reset proceedure of ign. on, then off, then tapping the alarm button produces no relay clicking noise,no horn sound and no exterior light flashes. The alarm button when activated glows red without blinking as it used to. Whether it's on or off, the alarm does not function. The keyless entry doesn't fuction either. The car still locks with a key and will lock by depressing the lock button on the driver door. The power locks on both doors work fine. I have a '92 with 174K miles. I found the procedure on this site with the reset walk through for the alarm. I tried it as stated. Dozens of times. No luck. Anybody have any thoughts on this? Help would be greatly apreciated.