SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Driver power window
I have a problem with my window going all the way up. It stops about four inches from the top. The motor continues running and the glass kind of buckles and struggles. It goes down and up to this point normally. I removed the inside half of the door to get a better look and I could see a white pulley where the cable goes around but could not see where the hang up was. I have replaced the whole window regulator years ago on this same window. Could anyone direct me what to try or replace for this. Thanks in advance for any info.
Mike
__________________
95 Pearl Blue L |
#2
|
|||
|
|||
Re: Driver power window
Results of search using "sleeve lock regulator"; a possible culprit perhaps?
http://www.subaru-svx.net/forum/sear...earchid=465028 Glenn
__________________
"The only thing necessary for the triumph of evil is for good men to do nothing" Aaron Burke 1993 25th Anniversary Edition #63 of 301. R.I.P. Rojo 7/24/2008 She saved my life! 1997 Ebony Mica Pearl LSI. BLACKBERRY 1998 5-Spd Legacy GT Wagon in Glacier White: NUBURU 2005 Cadillac STS in Sandstorm Metallic: STORMY Veteran and farthest traveler of 1st SoCal2MuseumsMeet2010. http://www.subaru-svx.net/photos/user.php?RojoRocket |
#3
|
||||
|
||||
Re: Driver power window
Your plastic sleeve lock regulator may be unseated...take your door panel off, peel back the plastic, and lower your window a bit to see if the cable is ok.
|
|
|