Greatly expanded suspension aftermarket?

[NikFu S.]

Talking about struts with someone then I did a random search on Altavista.

http://forums.probetalk.com/printthr...p?t=1701159979

"It seems like Probe struts fit the Subaru SVX. I know this becase I talked to a guy that autox's and he said he bought his illuminas for a probe and just installed them on his subaru.

just a little info...so I guess 99-05 Protege, PGT, and Subaru SVX struts are interchangable."

Please tell me someone can verify this.

---

Mazdaspeed Spring
F 280 lb/in
R 190.4 lb/in

Hmm...

[NikFu S.]

How bout this:

"Front shocks on the Subaru SVX are dimensionally identical to the struts on the Impreza/Legacy.
I did not check with a caliper, but the only difference I could tell between the struts was the metal tabs and such welded onto the base strut unit for brake lines/sway bars, etc."

http://forums.nasioc.com/forums/showthread.php?t=55636

[triumph1902]

I have 2nd gen probe Tokico Illuminas in the box in my garage right now waiting to be installed on my 95 PGT. If someone has some svx struts laying around, maybe we could compare measurements to see if theyre even close. As for coilovers or springs No way it would work...the SVX is way heavier than the probe.

[SilverSpear]

Originally Posted by NikFu S.

How bout this:

"Front shocks on the Subaru SVX are dimensionally identical to the struts on the Impreza/Legacy.
I did not check with a caliper, but the only difference I could tell between the struts was the metal tabs and such welded onto the base strut unit for brake lines/sway bars, etc."

http://forums.nasioc.com/forums/showthread.php?t=55636

I dunno about the probe struts, but the only struts that can fit our front are the rears of the impreza WRX (that after a lot of customizing)

[NikFu S.]

Customizing is out of the question. This guy claimed Toxico Illuminas bolted right up to his SVX, or the Probe guy interpreted it that way, and these struts are looking pretty sweet for a good price.

http://cgi.ebay.com/ebaymotors/TOKIC...56186847QQrdZ1

Triumph, you don't have an SVX lieing around to test them on ?

[triumph1902]

Originally Posted by NikFu S.

Customizing is out of the question. This guy claimed Toxico Illuminas bolted right up to his SVX, or the Probe guy interpreted it that way, and these struts are looking pretty sweet for a good price.

http://cgi.ebay.com/ebaymotors/TOKIC...56186847QQrdZ1

Triumph, you don't have an SVX lieing around to test them on ?

Actually the SVX is sitting right next to the probe the only problem is.. I dont want to take the suspensions apart just yet and lose alignment. However Im in the process of obtaining a set of spare SVX struts from a member here for a future koni setup I had planned. If I get those, I’ll measure out both sets and post the finding here.

[NikFu S.]

Whoo hoo! Timeframe?

[sicksubie]

What are the spring rates that the Tokicos are good for?

[NikFu S.]

Originally Posted by sicksubie

What are the spring rates that the Tokicos are good for?

From a guy with an Mx5 Miata.
"Front = 185 lb/in Linear

Rear = 155 lb/in Progressive

He said they were "slightly progressive", and the numbers were “averages”?"

My guess is the Probe would be more? Triumph should know.

Everywhere I look though the Konis are being favored as a brand. :/

[Motorsport-SVX]

fits or not, if they arent valved for the weight
of the vehicle, you wont get the proper compression
and rebound rates expected for the heavier Svx.

[NikFu S.]

Originally Posted by Motorsport-SVX

fits or not, if they arent valved for the weight
of the vehicle, you wont get the proper compression
and rebound rates expected for the heavier Svx.

Yeah there is a lot to consider but considering the lead I'm heading off of, some guy putting these struts on his SVX then running auto-x, supposedly knowing what he's doing, it's a good sign I guess.

BUT, I'm starting to wonder if I would get the SVX Konis anyways just because they are better and specifically designed.

In any case we are always looking for swappable parts and the info is invaluable.

[TheKoP]

Originally Posted by NikFu S.

Customizing is out of the question. This guy claimed Toxico Illuminas bolted right up to his SVX, or the Probe guy interpreted it that way, and these struts are looking pretty sweet for a good price.

http://cgi.ebay.com/ebaymotors/TOKIC...56186847QQrdZ1

Actually if you guys are considering picking any up may I suggest http://www.probegarage.net ? I've bought the same suspension from this guy last year for my MX6 and his service is outstanding. Nice suspension too, but I'd be weary of it on an SVX. It might be possible though.

[benebob]

No Impreza struts don't fit without work. The SVX hub where the strut attaches is wider then the legacy/impreza. That said you can get the springs to fit if you wanna be lower than low up front and higher than high in the rear. Good luck trying to get the swaybar mounted up front.

[triumph1902]

Well I havent heard anything about those struts yet so I measured my own. Heres the front one:








Obviously probe struts do not fit the svx. I did not bother with the rears, they werent even close.

On a better note the custom aluminum radiator I have been working on is almost finished

[SVX-FF]

Nice research Triumph.
The radiator looks nice and comfortable in there. Is that an oil cooler on the front. if so that is bad ass. I want one.

Steve